Page 53 - Turning_catalog_INCH_2022_45_P509-690

TAG N-C/W/M W C
Single-Ended Inserts for Parting, CW RE
Grooving and Slitting Bars, Hard 7º PARTING
Materials and Tough Applications

Dimensions Tough 1 Hard Recommended
Machining Data

IC830 IC928 IC1030 IC5400 IC1010 IC808 IC908 IC30N IC807 f groove
Designation CW CWTOL (3) RE IC20 (IPR)
TAG N1.4C .055 .0016 .0063 • .0016-.0039
TAG N1.6C .063 .0016 .0063 • • .0016-.0055
TAG N2C .079 .0016 .0079 • • • • • • • .0020-.0063
TAG N2.4C .094 .0016 .0063 • • .0024-.0071
TAG N3CB (1) .118 .0016 .0138 • • .0047-.0118
TAG N3C .120 .0016 .0079 • • • • • • • • • • .0039-.0098
TAG N3M (2) .120 .0016 .0079 • • .0024-.0071
TAG N3W .120 .0016 .0079 • • .0039-.0098
TAG N4C .157 .0016 .0094 • • • • • • • • • .0039-.0118
TAG N4CB (1) .157 .0016 .0157 • • .0039-.0130
TAG N4M (2) .157 .0016 .0094 • • .0024-.0079
TAG N4W .157 .0016 .0094 • • .0039-.0118
TAG N4.8C .189 .0016 .0118 • • .0039-.0138
TAG N5C .199 .0016 .0098 • • • .0039-.0138
TAG N6.3C .248 .0016 .0138 • • .0059-.0157
TAG N7W .276 .0031 .0197 • • .0071-.0157
TAG N8C .315 .0039 .0197 • • .0079-.0276
TAG N9.5W .374 .0020 .0197 • • .0087-.0315
TAG N9.5C .374 .0039 .0197 • • .0098-.0315
TAG N12.7W .500 .0039 .0335 • • .0118-.0315
• Feed values for grade IC20 should be decreased by 50% • For cutting speed recommendations see pages 600-601
(1) Larger corner radii for interrupted cut and high feed applications
(2) Similar to C-type, but with a modified edge; improved chip control at medium feeds
(3) Cutting width tolerance (+/-)
For tools, see pages: ADMP D45 (576) • Anti-Vibration Blades (293) • TAGPAD-JHP (554) • TAGPAD-XL-JHP (555) • TANMM (556)
• TGAD (552) • TGAD RE/LE-JHP (552) • TGAQ (570) • TGAQ-ECD (JET-CROWN) (573) • TGAQ-JHP (569) • TGBHR/L (354) • TGBHR/L-JHP (355)
• TGFH-JHP (547) • TGFH-MB (551) • TGFH-S (548) • TGFH/R/L (356) • TGFHL-TR (560) • TGFHR/L (549) • TGFHR/L-JHP (549) • TGFS (556)
• TGSU (550) • TGTR/L-2T..SH-L120 (558) • TGTR/L-D (559) • TGTR/L-IQ (557)
• TGTR/L-IQ-2Z (557) • TGTR/L-JHP (558)

561