Page 70 - Turning_catalog_INCH_2022_45_P509-690
P. 70
PARTING GIM-J-RA/LA ±0.1 RE CW 7° PSIRR BW .197 RA
Utility Single-Sided Inserts
.602 Ref.
for Parting and Grooving
Soft Materials, Parting Tubes
and Small Diameters
LA
Dimensions Tough 1 Hard Recommended
Machining Data
IC656 IC328 IC830 IC354 IC908 f groove
Designation CW RE CWTOL (1) PSIRL PSIRR BW IC54 IC20 (IPR)
GIM 2.2J-8LA .087 .0067 .0020 8.0 - .067 • • • • .0020-.0039
GIM 2.2J-8RA .087 .0067 .0020 - 8.0 .067 • • • • • • .0020-.0039
GIM 2.2JS-15LA .087 .0008 .0020 15.0 - .067 • • • .0020-.0039
GIM 2.2JS-15RA .087 .0008 .0020 - 15.0 .067 • • • • • • .0020-.0039
GIM 3J-4LA .118 .0087 .0020 4.0 - .094 • • .0020-.0047
GIM 3J-4RA .118 .0098 .0020 - 4.0 .094 • • • • .0020-.0047
GIM 3J-8LA .118 .0098 .0020 8.0 - .094 • • • • .0020-.0047
GIM 3J-8RA .118 .0098 .0020 - 8.0 .094 • • • • • • .0020-.0047
GIM 3JS-15LA .118 .0008 .0020 15.0 - .094 • • • .0020-.0047
GIM 3JS-15RA .118 .0008 .0020 - 15.0 .094 • • • • .0020-.0047
GIM 4J-6LA .157 .0098 .0020 6.0 - .126 • .0031-.0059
GIM 4J-6RA .157 .0098 .0020 - 6.0 .126 • • .0031-.0059
• For cutting speed recommendations and user guide, see pages 594-603
(1) Cutting width tolerance (+/-)
For tools, see pages: C#-GHDR/L (284) • CGHN 26-M (380) • CGHN 32-DGM (382) • CGHN 32-M (381) • CGHN-D (291) • CGHN-DG (292)
• CGHN-S (291) • CGPAD (290) • CGPAD-JHP (290) • GHDR/L (short pocket) (285) • GHDR/L-JHP (short pocket) (286) • GHGR/L (287)
• GHMPR/L (283) • GHMR/L (283) • GHSR/L (398) • GHSR/L-JHP-SL (399) • NQCH-GHSR/L-JHP (399)
GIM-W ±.004
Single-Sided Inserts with 7°
Center Ridged Chipformer and .602 Ref. .197
Reinforced Edge for Parting
and Grooving Alloy Steel CW BW
RE
Recommended
Dimensions Tough 1 Hard
Machining Data
IC328 IC830 IC354 IC908 f groove
Designation CW RE CWTOL (1) BW IC54 IC20 (IPR)
GIM 2.4 .094 .0071 .0020 .094 • • • .0039-.0071
GIM 3 .118 .0087 .0020 .094 • • • • • • .0039-.0071
GIM 3.2 .126 .0087 .0020 .094 • • • • • • .0039-.0079
GIM 4 .157 .0098 .0020 .126 • • • • • • .0059-.0079
• For cutting speed recommendations, see pages 600-601
(1) Cutting width tolerance (+/-)
For tools, see pages: C#-GHDR/L (284) • CGHN 26-M (380) • CGHN 32-DGM (382) • CGHN 32-M (381) • CGHN-D (291) • CGHN-DG (292)
• CGHN-S (291) • CGPAD (290) • CGPAD-JHP (290) • GHDR/L (short pocket) (285) • GHDR/L-JHP (short pocket) (286) • GHGR/L (287)
• GHMPR/L (283) • GHMR/L (283)
578 ISCAR