Page 71 - Turning_catalog_INCH_2022_45_P509-690

±.004
GIM-W-RA/LA 7˚
Single-Sided Screw-Clamped .602 Ref. .197
Inserts with Central Ridged PARTING
Chipformer for Parting Alloy Steel PSIRR BW
PSIRL

Dimensions Tough 1 Hard Recommended
Machining Data

IC656 IC328 IC830 IC54 IC354 IC908 IC20 f groove
Designation CW RE CWTOL (1) PSIRL PSIRR BW (IPR)
GIM 3-4LA .118 .0079 .0020 4.0 - .094 • • • .0031-.0063
GIM 3-8LA .118 .0079 .0020 8.0 - .094 • • • • • .0031-.0063
GIM 3S-15RA .118 .0087 .0020 - 15.0 .094 • .0031-.0063
GIM 3-4RA .118 .0098 .0020 - 4.0 .094 • • • • • • • .0031-.0063
GIM 3-8RA .118 .0098 .0020 - 8.0 .094 • • • • • • .0031-.0063
GIM 3.2-4LA .126 .0087 .0020 4.0 - .098 • .0031-.0063
GIM 3.2-4RA .126 .0087 .0020 - 4.0 .098 • • • .0031-.0063
GIM 3.2-8LA .126 .0087 .0020 8.0 - .098 • .0031-.0063
GIM 3.2-8RA .126 .0087 .0020 - 8.0 .098 • • • • .0031-.0063
GIM 4-4LA .157 .0098 .0020 4.0 - .126 • • .0039-.0063
GIM 4-4RA .157 .0098 .0020 - 4.0 .126 • • • • .0039-.0063
GIM 4-8LA .157 .0098 .0020 8.0 - .126 • .0039-.0063
GIM 4-8RA .157 .0098 .0020 - 8.0 .126 • • • • .0039-.0063
• For cutting speed recommendations and user guide, see pages 594-603
(1) Cutting width tolerance (+/-)
For tools, see pages: C#-GHDR/L (284) • CGHN 26-M (380) • CGHN 32-DGM (382) • CGHN 32-M (381) • CGHN-D (291) • CGHN-DG (292)
• CGHN-S (291) • CGPAD (290) • CGPAD-JHP (290) • GHDR/L (short pocket) (285) • GHDR/L-JHP (short pocket) (286) • GHGR/L (287)
• GHMPR/L (283) • GHMR/L (283)

GIM-UT ±.004
Single-Ended Screw-Clamped .602 Ref. 7°
Inserts for Parting and Grooving .197
at Low Feeds on CrNi Alloys CW
and Low Carbon Steel BW
RE
Recommended
Dimensions Tough 1 Hard
Machining Data

IC656 IC328 f groove
Designation CW RE CWTOL (1) BW (IPR)
GIM 4.6UT .181 .0236 .0012 .150 • • .0012-.0039
• For cutting speed recommendations and user guide, see pages 594-603
(1) Cutting width tolerance (+/-)
For tools, see pages: C#-GHDR/L (284) • CGHN 26-M (380) • CGHN 32-DGM (382) • CGHN 32-M (381) • CGHN-D (291) • CGHN-DG (292)
• CGHN-S (291) • CGPAD (290) • CGPAD-JHP (290) • GHDR/L (short pocket) (285) • GHDR/L-JHP (short pocket) (286) • GHGR/L (287)
• GHMPR/L (283) • GHMR/L (283)

579