Page 72 - Turning_catalog_INCH_2022_45_P509-690

PARTING GIM-UT-RA/LA ±.004 CW PSIRR BW .197
7°
Single-Ended Screw-Clamped
.602 Ref.
Inserts for Parting at Low
RE
Feeds on CrNi Alloys and
Low Carbon Steel

Dimensions Recommended
Machining Data

IC328 f groove
Designation CW RE CWTOL (1) PSIRR BW (IPR)
GIM 3UT-1.5RA .123 .0098 .0012 1.5 .098 • .0012-.0039
• For cutting speed recommendations and user guide, see pages 594-603
(1) Cutting width tolerance (+/-)
For tools, see pages: C#-GHDR/L (284) • CGHN 26-M (380) • CGHN 32-DGM (382) • CGHN 32-M (381) • CGHN-D (291) • CGHN-DG (292)
• CGHN-S (291) • CGPAD (290) • CGPAD-JHP (290) • GHDR/L (short pocket) (285) • GHDR/L-JHP (short pocket) (286) • GHGR/L (287)
• GHMPR/L (283) • GHMR/L (283)

GDMW 2.4 ±.004 .787 Ref.
Utility Double-Ended
Inserts for External Turning, 7˚ .217
Grooving and Parting
CW RE BW

Dimensions Tough 1 Hard Recommended Machining Data

IC830 IC808 IC908 IC20 IC20N ap f turn f groove
Designation CW RE CWTOL (1) RETOL (2) BW CDX (3) (inch) (IPR) (IPR)
GDMW 2.4 .094 .007 .0016 .0012 .079 .709 • • • • • .010-.059 .0027-.0047 .0020-.0031
• For cutting speed recommendations and user guide, see pages 594-603
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
For tools, see pages: PADR/L (318) • PHGR/L (318) • PHSR/L (398)

580 ISCAR