Page 21 - Aluminum_Machining_catalog_2023

29°
DCMT-14 55° 107.5° 91° MAX 93º-95º 30º
MAX
55° Rhombic Inserts with a 16º MAX 27° 60°
Positive Flank for Semi-Finish IC D1 93° MAX MAX
62.5º
and Finish Turning on Soft ISOTURN
Materials and Exotic Alloys RE 7°
L S
Dimensions Recommended Machining Data

IC20 ap f
Designation L IC S RE D1 (mm) (mm/rev)
DCMT 11T304-14 11.60 9.52 3.97 0.40 4.40 • 1.00-2.50 0.14-0.25
DCMT 11T308-14 11.60 9.52 3.97 0.80 4.40 • 1.50-3.00 0.14-0.29
• For user guide and cutting speed recommendations, see pages 4-6,26

27° 60°

DCGT-AF 55˚ 7˚ 107.5° 16º 93° MAX MAX
62.5º
Inserts with a Very Positive MAX 29°
Rake Angle and Sharp Cutting IC D1 91° MAX 93º-95º
Edge for Semi-Finishing 30º MAX
and Finishing Aluminum L RE S

Dimensions Recommended Machining Data

IC20 ap f
Designation L IC S RE D1 (mm) (mm/rev)
DCGT 11T304-AF 11.60 9.52 3.97 0.40 4.40 • 0.50-2.50 0.05-0.25
• For user guide and cutting speed recommendations, see pages 4-6,26

27° 60°
DCGT-AS 55˚ 7˚ 107.5° 93° MAX MAX
62.5º
16º
55° Rhombic Inserts with a 7° MAX 29°
Positive Flank, Very Positive IC D1 91° MAX 93º-95º
Rake Angle and Sharp Cutting 30º MAX
Edge for Machining Aluminum L RE S

Dimensions Recommended Machining Data

IC20 ap f
Designation L IC S RE D1 (mm) (mm/rev)
DCGT 070201-AS 7.75 6.35 2.38 0.10 2.80 • 0.50-2.00 0.03-0.20
DCGT 070202-AS 7.75 6.35 2.38 0.20 2.80 • 0.50-2.00 0.05-0.20
DCGT 070204-AS 7.75 6.35 2.38 0.40 2.80 • 0.50-2.50 0.05-0.25
DCGT 11T301-AS 11.60 9.52 3.97 0.10 4.40 • 0.50-2.50 0.05-0.25
DCGT 11T302-AS 11.60 9.52 3.97 0.20 4.40 • 0.50-2.50 0.05-0.26
DCGT 11T304-AS 11.60 9.52 3.97 0.40 4.40 • 0.50-2.50 0.05-0.25
DCGT 11T308-AS 11.60 9.52 3.97 0.80 4.40 • 0.80-3.00 0.08-0.30
• For user guide and cutting speed recommendations, see pages 4-6,26

Scan the QR code for additional information.
Enter the item description in the search field to access additional related data. 19