Page 25 - Aluminum_Machining_catalog_2023
P. 25
RCGT-AS 7˚
Round Inserts with a 7° Positive D1
Flank, Very Positive Rake
Angle and Sharp Cutting Edge ISOTURN
for Machining Aluminum IC S
Dimensions Recommended Machining Data
IC20 ap f
Designation IC S D1 (mm) (mm/rev)
RCGT 0803M0-AS 8.00 3.18 3.40 • 1.00-4.00 0.20-0.40
RCGT 1003M0-AS 10.00 3.18 4.00 • 1.00-5.00 0.20-0.40
RCGT 10T3M0-AS 10.00 3.97 4.40 • 1.00-5.00 0.20-0.40
• For user guide and cutting speed recommendations, see pages 4-6,26
RCMT-14
Round Inserts with a 7° IC D1 BN
Positive Flank for Medium
and Finish Profiling on a 7° GB
Wide Range of Materials S
Dimensions Recommended Machining Data
IC20 ap f
Designation IC S D1 GB BN (mm) (mm/rev)
RCMT 0803M0-14 8.00 3.18 3.40 15.0 0.15 • 1.00-4.00 0.30-0.45
RCMT 10T3M0-14 10.00 3.97 4.40 15.0 0.15 • 1.50-5.00 0.30-0.50
RCMT 1204M0-14 12.00 4.76 5.50 15.0 0.15 • 1.50-6.00 0.30-0.50
RCMT 1606M0-14 16.00 6.35 5.50 15.0 0.25 • 2.00-8.00 0.40-0.60
RCMT 2006M0-14 20.00 6.35 6.50 15.0 0.25 • 2.50-10.00 0.50-0.70
• For user guide and cutting speed recommendations, see pages 4-6,26
60°
TPGB 91º 95º
Triangular Inserts with an
11° Positive Flank for Short L
Chipping Materials D1
11°
RE
IC S
Dimensions Recommended Machining Data
ap f
Designation L IC S RE D1 IC20 (mm) (mm/rev)
TPGB 110204 11.00 6.35 2.38 0.40 3.00 • 1.00-3.00 0.05-0.25
• For user guide and cutting speed recommendations, see pages 4-6,26
Scan the QR code for additional information.
Enter the item description in the search field to access additional related data. 23