Page 36 - Aluminum_Machining_catalog_2023

GROOVE-TURN INDEXABLE INSERTS
GIPA (W=3-6) ±0.025
Double-Ended Precision Ground 7° 5
Inserts with a Polished Top 15 Ref.
Rake for Machining Aluminum
CW
RE BW
GIPA…D-ID5
Dimensions Tough 1 Hard Recommended Machining Data

IC20 ID5 ap f turn f groove
Designation CW RE CWTOL (2) RETOL (3) BW (mm) (mm/rev) (mm/rev)
GIPA 3.00-0.20 3.00 0.20 0.020 0.030 2.40 • 0.25-1.80 0.12-0.20 0.08-0.14
GIPA 3.00-0.20-D (1) 3.00 0.20 0.020 0.030 2.40 • 0.25-1.80 0.12-0.25 0.09-0.16
GIPA 4.00-0.40 4.00 0.40 0.020 0.030 3.20 • 0.50-2.40 0.14-0.31 0.10-0.20
GIPA 5.00-0.40 5.00 0.40 0.020 0.030 4.00 • 0.50-3.00 0.16-0.34 0.11-0.23
GIPA 6.00-0.40 6.00 0.40 0.020 0.030 4.80 • 0.50-3.60 0.19-0.41 0.11-0.26
• DMIN for internal machining = 70 mm • For user guide, see page 32
(1) Single-ended PCD tipped insert
(2) Cutting width tolerance (+/-)
(3) Corner radius tolerance (+/-)

±0.025

GIPA (full radius W=3-6)
Precision Double-Ended 7°
Inserts with Polished Top Rake 15 Ref. 5
for Machining Aluminum
CW
RE BW

Dimensions Tough 1 Hard Recommended Machining Data

IC20 IC806 IC4 ID5 ap f turn f groove
Designation CW RE CWTOL (4) RETOL (5) BW (mm) (mm/rev) (mm/rev)
GIPA 3.00-1.50 3.00 1.50 0.020 0.050 2.40 • 0.00-1.50 0.15-0.30 0.08-0.16
GIPA 3.00-1.50-D (1) 3.00 1.50 0.020 0.050 2.40 • 0.00-1.50 0.19-0.36 0.09-0.19
GIPA 4.00-2.00 4.00 2.00 0.020 0.050 3.20 • • 0.00-2.00 0.20-0.43 0.10-0.22
GIPA 4.00-2.00-D (1) 4.00 2.00 0.020 0.050 3.20 • 0.00-2.00 0.25-0.53 0.12-0.26
GIPA 4.00-2.00YZ-D (2) 4.00 2.00 0.020 0.050 3.20 • 0.00-2.00 0.25-0.53 0.12-0.26
GIPA 5.00-2.50 5.00 2.50 0.020 0.050 3.90 • • 0.00-2.50 0.21-0.48 0.09-0.24
GIPA 5.00-2.50-D (1) 5.00 2.50 0.020 0.050 3.90 • 0.00-2.50 0.22-0.60 0.11-0.30
GIPA 5.00-2.50YZ-D (2) 5.00 2.50 0.020 0.050 3.90 • 0.00-2.50 0.22-0.60 0.11-0.30
GIPA 6.00-3.00 6.00 3.00 0.020 0.050 4.80 • • 0.00-3.00 0.21-0.58 0.11-0.29
GIPA 6.00-3.00-D (1) 6.00 3.00 0.020 0.050 4.80 • 0.00-3.00 0.26-0.72 0.13-0.36
GIPA 6.00-3.00YZ 6.00 3.00 0.020 0.050 4.80 • 0.00-3.00 0.21-0.58 0.11-0.29
GIPA 6.00-3.00YZ-D (2) 6.00 3.00 0.020 0.050 4.80 • 0.00-3.00 0.26-0.72 0.13-0.36
GIPA 6.00-3.00CB (3) 6.00 3.00 0.020 0.050 4.80 • 0.00-3.00 0.21-0.58 0.11-0.29
• For user guide, see page 32
(1) Single-ended PCD tipped insert
(2) Single-ended molded PCD chipformer tipped insert
(3) Single-ended flat PCD tipped insert with chip deflector
(4) Cutting width tolerance (+/-)
(5) Corner radius tolerance (+/-)
• First choice grade

34 ISCAR Scan the QR code for additional information.
Enter the item description in the search field to access additional related data.