Page 31 - Aluminum_Machining_catalog_2023

80° 10° 95º
CNMA (PCD) RE LE L 95º
80° Rhombic Inserts with 5° 95º
a Single PCD Top Corner
Tip and Positive Rake for ISOTURN
Finishing Applications
IC S

Dimensions Recommended Machining Data

ap f
Designation L IC S RE LE ID5 (mm) (mm/rev)
CNMA 120404D 12.90 12.70 4.76 0.40 3.9 • 0.10-3.00 0.05-0.26
CNMA 120408D 12.90 12.70 4.76 0.80 3.6 • 0.10-3.00 0.05-0.26
• For user guide and cutting speed recommendations, see pages 4-5,27-28,31

80° 95º 99°

CCMT (PCD) RE LE L 7° 95º 91°
Inserts with a Single PCD 7° 95º
Top Corner Tip, 7° Clearance D1
and Positive Rake Angle
for Finishing Aluminum
IC S
Recommended
Dimensions
Machining Data
ap f
Designation L IC S RE LE D1 ID5 (mm) (mm/rev)
CCMT 060202D 6.30 6.35 2.38 0.20 3.1 2.80 • 0.08-3.00 0.05-0.30
CCMT 060204D 6.30 6.35 2.38 0.40 3.0 2.80 • 0.10-3.00 0.05-0.30
CCMT 09T304D 9.70 9.52 3.97 0.40 3.9 4.40 • 0.10-3.00 0.05-0.30
• For user guide and cutting speed recommendations, see pages 4-5,27-28,31

RE 55° 29°
DCMT (PCD) LE L 7° 7° 107.5° 16º 91° MAX 93º-95º 30º
MAX
55° Rhombic Inserts with a PCD MAX 27° 60°
Single Top Corner Tip, D1 93° MAX MAX
62.5º
7° Clearance and Positive Rake
Angle for Finishing Applications
IC S
Recommended
Dimensions Machining Data
ap f
Designation L IC S RE LE D1 ID5 (mm) (mm/rev)
DCMT 11T302D 11.60 9.52 3.97 0.20 3.7 4.40 • 0.10-3.00 0.05-0.30
DCMT 11T304D 11.60 9.52 3.97 0.40 3.6 4.40 • 0.10-3.00 0.05-0.30
DCMT 11T308D 11.60 9.52 3.97 0.80 3.3 4.40 • 0.10-3.00 0.05-0.29
• For user guide and cutting speed recommendations, see pages 4-5,27-28,31

Scan the QR code for additional information.
Enter the item description in the search field to access additional related data. 29