Page 35 - Aluminum_Machining_catalog_2023
P. 35
INSL (Ref.) 6˚
GRIPA ±0.025
Ground Double-Ended
Inserts for External, Internal
and Face Machining RE BW
CW
Dimensions Recommended Machining Data
f face-
IC07 ap f turn f groove groove f face-turn
Designation CW CWTOL (1) RE RETOL (2) INSL BW (mm) (mm/rev) (mm/rev) (mm/rev) (mm/rev)
GRIPA 3.00-0.40 3.00 0.020 0.40 0.030 16.00 2.28 • 0.25-1.80 0.15-0.19 0.07-0.11 0.08-0.14 0.12-0.20
GRIPA 4.00-0.40 4.00 0.020 0.40 0.030 19.02 2.82 • 0.50-2.40 0.18-0.24 0.09-0.15 0.10-0.20 0.14-0.31
GRIPA 5.00-0.40 5.00 0.020 0.40 0.030 19.02 3.40 • 0.50-3.00 0.20-0.30 0.11-0.20 0.11-0.23 0.16-0.34 GROOVE-TURN INDEXABLE INSERTS
GRIPA 6.00-0.80 6.00 0.020 0.80 0.050 19.00 4.20 • 0.50-3.60 0.24-0.42 0.13-0.25 0.11-0.26 0.19-0.41
• For user guide, see page 32
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
INSL (Ref.) 6˚
GRIPA (full radius) ±0.025
Ground Double-Ended Full
Radius Inserts for External,
Internal and Face Machining RE BW
CW
Dimensions Recommended Machining Data
f face- f face-turn
groove
f groove
f turn
ap
Designation CW CWTOL (1) RE RETOL (2) INSL BW IC07 (mm) (mm/rev) (mm/rev) (mm/rev) (mm/rev)
GRIPA 3.00-1.50 3.00 0.020 1.50 0.050 15.96 2.28 • 0.25-1.80 0.18-0.26 0.07-0.13 0.08-0.14 0.12-0.20
GRIPA 4.00-2.00 4.00 0.020 2.00 0.050 19.16 2.82 • 0.50-2.40 0.20-0.34 0.09-0.17 0.10-0.20 0.14-0.31
GRIPA 5.00-2.50 5.00 0.020 2.50 0.050 19.16 3.40 • 0.50-3.00 0.23-0.42 0.11-0.21 0.11-0.23 0.16-0.34
GRIPA 6.00-3.00 6.00 0.020 3.00 0.050 19.16 3.97 • 0.50-3.60 0.24-0.50 0.13-0.25 0.11-0.26 0.19-0.41
• For user guide, see page 32
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
Scan the QR code for additional information.
Enter the item description in the search field to access additional related data. 33