Page 43 - Aluminum_Machining_catalog_2023

±0.025
GIPA (full radius W=3-6)
Precision Double-Ended 7°
Inserts with Polished Top Rake 15 Ref. 5
for Machining Aluminum
CW
RE BW

Dimensions Tough 1 Hard Recommended Machining Data

IC20 IC4 ID5 ap f turn f groove
Designation CW RE CWTOL (4) RETOL (5) BW (mm) (mm/rev) (mm/rev)
GIPA 3.00-1.50 3.00 1.50 0.020 0.050 2.40 • 0.00-1.50 0.15-0.30 0.08-0.16
GIPA 3.00-1.50-D (1) 3.00 1.50 0.020 0.050 2.40 • 0.00-1.50 0.19-0.36 0.09-0.19
GIPA 4.00-2.00 4.00 2.00 0.020 0.050 3.20 • 0.00-2.00 0.20-0.43 0.10-0.22
GIPA 4.00-2.00-D (1) 4.00 2.00 0.020 0.050 3.20 • 0.00-2.00 0.25-0.53 0.12-0.26
GIPA 4.00-2.00YZ-D (2) 4.00 2.00 0.020 0.050 3.20 • 0.00-2.00 0.25-0.53 0.12-0.26
GIPA 5.00-2.50 5.00 2.50 0.020 0.050 3.90 • 0.00-2.50 0.21-0.48 0.09-0.24
GIPA 5.00-2.50-D (1) 5.00 2.50 0.020 0.050 3.90 • 0.00-2.50 0.22-0.60 0.11-0.30
GIPA 5.00-2.50YZ-D (2) 5.00 2.50 0.020 0.050 3.90 • 0.00-2.50 0.22-0.60 0.11-0.30
GIPA 6.00-3.00 6.00 3.00 0.020 0.050 4.80 • • 0.00-3.00 0.21-0.58 0.11-0.29
GIPA 6.00-3.00-D (1) 6.00 3.00 0.020 0.050 4.80 • 0.00-3.00 0.26-0.72 0.13-0.36
GIPA 6.00-3.00YZ 6.00 3.00 0.020 0.050 4.80 • 0.00-3.00 0.21-0.58 0.11-0.29
GIPA 6.00-3.00YZ-D (2) 6.00 3.00 0.020 0.050 4.80 • 0.00-3.00 0.26-0.72 0.13-0.36
GIPA 6.00-3.00CB (3) 6.00 3.00 0.020 0.050 4.80 • 0.00-3.00 0.21-0.58 0.11-0.29
(1) Single-ended PCD tipped insert TOOLS AND INSERTS FOR MACHINING ALUMINUM WHEELS
(2) Single-ended molded PCD chipformer tipped insert
(3) Single-ended flat PCD tipped insert with chip deflector
(4) Cutting width tolerance (+/-)
(5) Corner radius tolerance (+/-)

Scan the QR code for additional information.
Enter the item description in the search field to access additional related data. 41