Page 100 - ISCAR FACE GROOVING LINES

FACE GROOVE-TURN GDMN ±0.1 30 Ref.
Utility Double-Ended Inserts
for Grooving and Turning 7° 6.4
Ductile Materials BW

CW

RE

METRIC

Dimensions Tough 1 Hard Recommended Machining Data

IC830 ap f turn f groove
IC8250
Designation CW RE CWTOL(1) RETOL(2) CDX(3) BW IC808 (mm) (mm/rev) (mm/rev)
GDMN 808 IC907

8.00 0.80 0.05 0.050 27.00 6.00 • • • • 1.00-3.20 0.20-0.35 0.10-0.30

• DMIN for internal machining = 65 mm • For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
For tools, see pages: • GAFG-R/L-8 (87) • GHFG-R/L-8 (83) • GHFGR/L-8 (84)

GDMN ±.004 1.18 Ref.
Utility Double-Ended Inserts
for Grooving and Turning 7° .252
Ductile Materials BW

CW

RE

I NCH
Dimensions
Tough 1 Hard Recommended Machining Data

Designation CW RE CWTOL(1) RETOL(2) CDX(3) BW IC830 ap f turn f groove
GDMN 808 IC8250 (inch) (IPR) (IPR)
IC808 .039-.126 .0079-.0138
IC907 .0039-.0118

.315 .031 .0020 .0020 1.063 .236 • • • •

• DMIN for internal machining = 2.56" • For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
For tools, see pages: • GAFG-R/L-8 (87) • GHFG-R/L-8 (83) • GHFGR/L-8 (84)

98 ISCAR