Page 152 - ISCAR FACE GROOVING LINES

FACE GROOVE-TURN IM

LPR

IM-MAHD DCONMS WF DCONMS CDX = See specific adapter dimensions
Holders with an ISO 26622-1(*) 40.00 • Right-handshown
Tapered Shank for Parting, 50.00 CDX C
Grooving, Turning and 63.00 WF CDI(1)
Facing Adapters METRI 18.0 0
LPR 23.0 0
Designation 43.00 29.0 0
IM40 MAHD 47.00
IM50 MAHD 52.00 WF CDI(1)
IM63 MAHD .709 0
.906 0
INC H 1.142 0
LPR
Designation DCONMS 1.693
1.575 1.850
IM40 MAHD 1.968 2.047
IM50 MAHD 2.480
IM63 MAHD

• (*) Tools with orientation holes in the flange groove can be supplied on request
(1) 1 - Hole for data chip, 0 - Without hole for data chip
For tools, see pages: • HFPAD-3 (49) • HFPAD-4 (49) • HFPAD-5 (50) • HFPAD-6 (50)

Spare Parts

Designation

IM-MAHD SR M5-04451 T-20/5 SR 14-519(a) SR M6X20-XT(c) HW 5.0 SR M6X6DIN551 14H/22H(d) SR 76-1022 EZA 125 EZ 125

(a) For DGAD, HGAD and PCADR/L adapters; supplied in the attached plastic bag

(b) For CGPAD, HGPAD, TGPAD and HFPAD adapters; supplied with the tools

(c) For CGPAD, HGPAD, TGPAD and HFPAD adapters; supplied with the tools

(d) Used to prevent chips from entering the upper locking screw hole when it is not used for the adaptation; supplied in the attached plastic bag

150 ISCAR