Page 153 - ISCAR FACE GROOVING LINES
P. 153
LPR FACE GROOVE-TURN
IM-MAHPD DCONMS WF
Perpendicular Holders with CDX = See specific adapter dimensions
an ISO 26622-1(*) Tapered CDX • Right-hand shown
Shank for Parting, Grooving,
Turning and Facing Adapters DCONMS METRIC WF CDI(1)
40.00 LPR 25.00 0
Designation 50.00 44.00 26.00 0
IM40 MAHPD 63.00 45.00 33.00 0
IM50 MAHPD 45.00
IM63 MAHPD
INC H
LPR
Designation DCONMS 1.732 WF CDI(1)
1.575 1.772 .984 0
IM40 MAHPD 1.968 1.772 1.024 0
IM50 MAHPD 2.480 1.299 0
IM63 MAHPD
• (*) Tools with orientation holes in the flange groove can be supplied on request
(1) 1 - Hole for data chip, 0 - Without hole for data chip
For tools, see pages: • HFPAD-3 (49) • HFPAD-4 (49) • HFPAD-5 (50) • HFPAD-6 (50)
Spare Parts
Designation
IM-MAHPD SR M5-04451 T-20/5 SR 14-519(a) SR M6X20-XT(b) HW 5.0 SR M6X6DIN551 14H/22H(c) EZP 5 EZ 125
(a) For DGAD, HGAD and PCADR/L adapters; supplied in the attached plastic bag
(b) For CGPAD, HGPAD, TGPAD and HFPAD adapters; supplied with the tools
(c) Used to prevent chips from entering the upper locking screw hole when it is not used for the adaptation; supplied in the attached plastic bag
IM-GHAD-8 CDX WF LF DCONMS
Holders with an ISO 26622-1(*) DAXN-DAXX CDX CDX - See specific adapter dimensions
Tapered Shank for Grooving,
Turning and Facing Adapters CW
M E T RI C
CW LF WF DAXN(1)
Designation DCONMS 8.00 60.00 26.00 80.0 DAXX(2) CDX(3) CDI(4)
IM50 GHAD-8 50.00 8.00 65.00 32.50 80.0 510.0 25.00 0
IM63 GHAD-8 63.00 510.0 25.00 0
CH DAXN(1)
IN WF 3.15 DAXX(2) CDX(3) CDI(4)
1.024 3.15 20.08 .984 0
Designation DCONMS CW LF 1.280 20.08 .984 0
IM50 GHAD-8
IM63 GHAD-8 1.968 .315 2.362
2.480 .315 2.559
• (*) Tools with orientation holes in the flange groove can be supplied on request
(1) Minimum axial grooving diameter
(2) Maximum axial grooving diameter
(3) Cutting depth maximum
(4) 1 - Hole for data chip, 0 - Without hole for data chip
For tools, see pages: • GAFG-R/L-8 (87)
Spare Parts SR 14-519 T-20/5 SR M6X25 DIN912 HW 5.0 SR 76-1022 EZA 125 EZ 125
Designation
IM-GHAD-8
151
