Page 154 - ISCAR FACE GROOVING LINES

FACE GROOVE-TURN CDX LPR

DCONMS

IM-HAD WF
Holders with an ISO 26622-1(*)
Tapered Shank for Internal 26 CDX - See specific adapter dimensions
Facing Adapters
METRIC

Designation DCONMS LPR WF CDI(1)
IM40 HAD
IM50 HAD 40.00 60.00 18.0 0 SR 14-519 T-20/3 HW 3.0 SR M4X6DIN912
HW 3.0 SR M4X6DIN912
50.00 60.00 18.0 0 SR 14-519 T-20/3

INCH

Designation DCONMS LPR WF CDI(1)
IM40 HAD 1.575 2.362
IM50 HAD 1.968 2.362 .709 0 SR 14-519 T-20/3 HW 3.0 SR M4X6DIN912
HW 3.0 SR M4X6DIN912
.709 0 SR 14-519 T-20/3

• (*) Tools with orientation holes in the flange groove can be supplied on request
(1) 1 - Hole for data chip, 0 - Without hole for data chip
For tools, see pages: HFAER/L-4 (53) • HFAER/L-5T, 6T (53) • HFAIR/L-4 (60) • HFAIR/L-DG (61) • HGAER/L-3 (52) • HGAIR/L-3 (57)

8 DCONMS
LF
IM-HAPR/L CDX CDX - See specific adapter dimensions
Perpendicular Holders with an • Right-hand shown
ISO 26622-1 (*) Tapered Shank
for Internal Facing Adapters

METRIC

Designation DCONMS LF CDI(1) SR 14-519 T-20/3
IM40 HAPR/L 40.00 50.00 0 SR 14-519 T-20/3
IM50 HAPR 50.00 50.00 0

INCH

Designation DCONMS LF CDI(1)

IM40 HAPR/L 1.575 1.968 0 SR 14-519 T-20/3
IM50 HAPR 1.968 1.968 0 SR 14-519 T-20/3

• (*) Tools with orientation holes in the flange groove can be supplied on request
(1) 1 - Hole for data chip, 0 - Without hole for data chip
For tools, see pages: HFAER/L-4 (53) • HFAER/L-5T, 6T (53) • HFAIR/L-4 (60) • HFAIR/L-DG (61) • HGAER/L-3 (52) • HGAIR/L-3 (57)

152 ISCAR