Page 85 - ISCAR FACE GROOVING LINES
P. 85
CUT-GRIP (long pocket) FACE GROOVE-TURN
GHFG-R/L-8 LH OAL H
Holders for Face Grooving DAXN-DAXX HF GHFG-25-50R-8
and Turning Along Shafts CDX
CW B
WF
Right-hand shown
METRIC
Designation CW CDX DAXN(1) DAXX(2) H HF B OAL LH WF
GHFG 25-50R/L-8 8.00 25.00 50.0 64.0 25.0 25.0 25.0 150.00 41.0 22.00 SR M6X20 DIN912 HW 5.0
GHFG 25-63R/L-8
GHFG 32-63R-8 8.00 25.00 63.0 82.0 25.0 25.0 25.0 150.00 41.0 22.00 SR M6X20 DIN912 HW 5.0
8.00 25.00 63.0 82.0 32.0 32.0 32.0 170.00 41.0 30.00 SR M6X20 DIN912 HW 5.0
INCH
Designation CW CDX DAXN(1) DAXX(2) H HF B OAL LH WF
GHFG 25.4-50R/L-8 .315 1.000 1.97 2.52 1.000 1.000 1.000 6.000 1.600 .870 SR M6X20 DIN912 HW 5.0
GHFG 25.4-63R/L-8 .315 1.000 2.48 .870 SR M6X20 DIN912 HW 5.0
3.23 1.000 1.000 1.000 6.000 1.600
• For user guide, see pages 161-173
(1) Minimum penetration diameter
(2) Maximum penetration diameter
For inserts, see pages: GDMF (100) • GDMM-CC (108) • GDMN (98) • GDMU (99) • GDMY (95) • GDMY (full radius) (96) • GDMY-F (97)
• GIA-K (long pocket) (93) • GIF (long pocket) (91) • GIF-E (W=8,10 full radius) (92) • GIF-E (W=8,10) (90) • GIFG-E (W=8) (89)
83
