Page 84 - ISCAR FACE GROOVING LINES

FACE GROOVE-TURNDGN/DGNM-J/JS/JT ±0.1 DGN 1002 DGNM
IC328Double-Sided Inserts for Parting
IC830and Grooving Soft Materials,RE INSL7°
IC928Parting Tubes, Small DiametersCWCDX
IC1030and Thin-Walled Parts
IC1028
IC354
IC5400
IC1010
IC308
IC808
IC908
IC20
IC807
METRIC

Dimensions Tough 1 Hard Recommended
Machining Data

f groove

Designation CW CWTOL(3) RE RETOL(4) CDX(5) INSL (mm/rev)

DGN 4003J 4.00 0.04 0.30 0.030 - (6) 18.90 • • ••• •••••• 0.05-0.18
DGN 4003JT 4.00 0.04 18.90 • • ••• 0.05-0.18
DGN 4803J 4.80 0.04 0.30 0.030 - (6) 20.40 • 0.05-0.20
DGN 5003J 5.00 0.04 • 0.05-0.20
DGN 5003JT 5.00 0.04 0.30 0.030 - (6) 19.00 • • ••• • ••• 0.05-0.20
DGN 6303J 6.35 0.04 0.05-0.25
DGN 6303JT 6.35 0.04 0.30 0.030 - (6) 19.00 • • 0.05-0.25

0.30 0.030 - (6) 19.10 • • •••

0.35 0.030 - (6) 19.10 •

0.35 0.030 - (6)

• JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge; most suitable for soft materials at low to medium feeds
• For cutting speed recommendations and user guide, see pages 161-173
(1) Sharp corners
(2) Single-ended insert
(3) Cutting width tolerance (+/-)
(4) Corner radius tolerance (+/-)
(5) Cutting depth maximum
(6) No depth limit
For tools, see pages: • C#-HFIR/L-MC (145) • CR HFIR-M (65) • HFAER/L-4 (53) • HFAER/L-5T, 6T (53) • HFAIR/L-4 (60) • HFAIR/L-DG (61) • HFFR/L-T (51)
• HFHR/L-4T (41) • HFHR/L-5T (43) • HFHR/L-6T (45) • HFIR/L-MC (63) • HFPAD-4 (49) • HFPAD-5 (50) • HFPAD-6 (50) • HFPAD-JHP (48) • IM-HFIR-MC (62)

DGN/DGNM-J/JS/JT ±.004 DGN 1002 DGNM
Double-Sided Inserts for Parting
and Grooving Soft Materials, RE INSL 7°
Parting Tubes, Small Diameters CW CDX
and Thin-Walled Parts

Dimensions INCH Recommended
Tough 1 Hard Machining Data

IC328 f groove
IC830
Designation CW CWTOL(3) RE RETOL(4) CDX(5) INSL IC928 (IPR)
IC1030
DGN 4003J IC1028 .0020-.0071
DGN 4003JT IC354 .0020-.0071
DGN 4803J IC5400 .0020-.0079
DGN 5003J IC1010 .0020-.0079
DGN 5003JT IC308 .0020-.0079
DGN 6303J IC808 .0020-.0098
DGN 6303JT IC908 .0020-.0098
IC20
IC807

.157 .0016 .0118 .0012 - (6) .744 • • ••• ••••••
.744 • • •••
.157 .0016 .0118 .0012 - (6) .803 •
.748 • • •
.189 .0016 .0118 .0012 - (6) ••• • •••

.197 .0016 .0118 .0012 - (6) .748 • •

.197 .0016 .0118 .0012 - (6) .752 • • •••

.250 .0016 .0138 .0012 - (6) .752 •

.250 .0016 .0138 .0012 - (6)

• JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge; most suitable for soft materials at low to medium feeds
• For cutting speed recommendations and user guide, see pages 161-173
(1) Sharp corners
(2) Single-ended insert
(3) Cutting width tolerance (+/-)
(4) Corner radius tolerance (+/-)
(5) Cutting depth maximum
(6) No depth limit
For tools, see pages: • C#-HFIR/L-MC (145) • CR HFIR-M (65) • HFAER/L-4 (53) • HFAER/L-5T, 6T (53) • HFAIR/L-4 (60) • HFAIR/L-DG (61) • HFFR/L-T (51)
• HFHR/L-4T (41) • HFHR/L-5T (43) • HFHR/L-6T (45) • HFIR/L-MC (63) • HFPAD-4 (49) • HFPAD-5 (50) • HFPAD-6 (50) • HFPAD-JHP (48) • IM-HFIR-MC (62)

82 ISCAR