Page 82 - ISCAR FACE GROOVING LINES
P. 82
FACE GROOVE-TURN DGN-MF ±0.1
Double-Sided Inserts for Parting
and Grooving Soft and Hard 7°
Materials at Medium Feeds RE
CW
INSL
METRIC Tough 1 Hard Recommended
Dimensions Machining Data
IC830 f groove
IC1030
Designation CW RE CWTOL(1) CDX(2) INSL IC5400 (mm/rev)
DGN 4003MF IC1010
IC808• 0.08-0.20
4.00 0.30 0.04 - (3) 18.80 •
• For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Cutting depth maximum
(3) No depth limit
For tools, see pages: • C#-HFIR/L-MC (145) • CR HFIR-M (65) • HFAER/L-4 (53) • HFAIR/L-4 (60) • HFAIR/L-DG (61) • HFFR/L-T (51) • HFHR/L-4T (41) • HFIR/L-MC (63)
• HFPAD-4 (49) • HFPAD-JHP (48) • IM-HFIR-MC (62)
DGN-MF ±.004
Double-Sided Inserts for Parting
and Grooving Soft and Hard 7°
Materials at Medium Feeds RE
CW
INSL
IN C H
Dimensions
Tough 1 Hard Recommended
Machining Data
IC830 f groove
IC1030
Designation CW RE CWTOL(1) CDX(2) INSL IC5400 (IPR)
DGN 4003MF IC1010
IC808• .0032-.0079
.157 .0118 .0016 - .740 •
• For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Cutting depth maximum
For tools, see pages: • C#-HFIR/L-MC (145) • CR HFIR-M (65) • HFAER/L-4 (53) • HFAIR/L-4 (60) • HFAIR/L-DG (61) • HFFR/L-T (51) • HFHR/L-4T (41) • HFIR/L-MC (63)
• HFPAD-4 (49) • HFPAD-JHP (48) • IM-HFIR-MC (62)
80 ISCAR
