Page 80 - ISCAR FACE GROOVING LINES
P. 80
FACE GROOVE-TURN HGN-UT ±0.1
Double-Sided Inserts for
Parting and Grooving Low RE
Feeds on Cr-Ni Alloys and
Low Carbon Steel CW
INSL
METRIC Tough 1 Hard Recommended
Dimensions Machining Data
Designation CW RE CWTOL(1) RETOL(2) INSL IC328 f groove
0.030 15.80 IC354 (mm/rev)
0.04-0.13
HGN 3003UT 3.00 0.30 0.05 ••
• No depth limit • For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: • HFPAD-3 (49) • HFPAD-JHP (48) • HGAIR/L-3 (57) • HGHR/L-3 (39)
HGN-UT ±.004
Double-Sided Inserts for
Parting and Grooving Low RE
Feeds on Cr-Ni Alloys and
Low Carbon Steel CW
INSL
INC H
Dimensions
Tough 1 Hard Recommended
Machining Data
Designation CW RE CWTOL(1) RETOL(2) INSL IC328 f groove
.0012 .622 IC354 (IPR)
HGN 3003UT .118 .0118 .0020 •• .0016-.0051
• No depth limit • For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: • HFPAD-3 (49) • HFPAD-JHP (48) • HGAIR/L-3 (57) • HGHR/L-3 (39)
78 ISCAR
