Page 128 - MILLING CATALOG p319-550
P. 128
MILLING INSERTS RE Rd°
IC328
IC830HP ANKT/ANCT 0702..APMX lNSL Recommended
IC928PN-R/PNTR Machining Data
IC5400Inserts with a 7 mm HelicalBS
IC950Edge and Various CornerW1
IC808Radii for General Use
IC908
IC30NS
IC810
IC910DimensionsTough 1 Hard
DT7150
ap fz
Designation W1 APMX BS RE INSL S (mm) (mm/t)
4.50 7.70 1.50 0.20 8.70 2.60 • 0.60-7.70 0.05-0.10
HP ANCT 070202 PN-R 4.50 7.70 1.40 0.40 8.70 2.60 •• • 0.80-7.70 0.05-0.10
HP ANCT 070204PN-R 4.50 7.70 1.30 0.50 8.70 2.60 •••• •• ••
HP ANKT 0702 PN-R 4.50 7.70 1.60 0.20 8.70 2.60 •• 0.90-7.70 0.06-0.10
HP ANKT 070202PNTR 4.50 7.70 1.30 0.50 8.70 2.60
HP ANKT 0702PNTR 4.50 7.70 1.00 0.80 8.70 2.60 0.70-7.70 0.08-0.15
HP ANKT 070208PNTR 4.50 7.70 0.70 1.20 8.70 2.60 • • • • • • • • 0.90-7.70 0.08-0.12
HP ANKT 070212PNTR 4.50 7.70 0.20 1.60 8.70 2.60 •• •• 1.20-7.70 0.08-0.15
HP ANKT 070216PNTR ••
•• 1.60-7.70 0.08-0.15
2.00-7.70 0.08-0.15
• For cutting speed recommendations, see pages 542-547
For tools, see pages: HP ANK-07 (235) • HP E90AN-07 (17) • HP E90AN-M-07 (17) • HP E90AN-MM-07 (18) • HP F90AN-07 (195)
PN-R PNTR
RE Rd°
HP ANKW 070204PNTR APMX lNSL Recommended
Insert with a 7 mm Helical Machining Data
Edge and Flat Rake for Rough
Machining and Hardened Steel
BS S
W1
Dimensions Tough 1 Hard
Designation INSL APMX S RE BS W1 IC928 ap fz
IC910 (mm) (mm/t)
0.80-7.70 0.08-0.15
HP ANKW 070204PNTR 8.70 7.70 2.60 0.40 1.20 4.50 • •
• Reinforced flat rake for machining cast iron. For cutting speed recommendations, see pages 542-547
For tools, see pages: HP ANK-07 (235) • HP E90AN-07 (17) • HP E90AN-M-07 (17) • HP E90AN-MM-07 (18) • HP F90AN-07 (195)
RE Rd°
HP ANCR 0702PNFR APMX lNSL Recommended
Peripherally Ground Inserts with Machining Data
a Super Positive Chipformer BS
for Machining Aluminum, W1
Titanium and Magnesium
S
Dimensions Tough 1 Hard
Designation INSL APMX S RE BS W1 IC28 ap fz
HP ANCR 070204PNFR 8.70 IC328
HP ANCR 070204PNFR-P (1) 8.70 IC928 (mm) (mm/t)
IC908 0.80-7.70 0.07-0.20
0.80-7.70 0.07-0.20
7.70 2.60 0.40 1.20 4.50 •• •
7.70 2.60 0.40 1.20 4.50 •
• For cutting speed recommendations, see pages 542-547
(1) Polished rake
For tools, see pages: HP ANK-07 (235) • HP E90AN-07 (17) • HP E90AN-M-07 (17) • HP E90AN-MM-07 (18) • HP F90AN-07 (195)
444 ISCAR