Page 129 - MILLING CATALOG p319-550

AEW1 S IC830 Rd°
IC808
HP ANKT 0702...-FF INSL
Inserts for Fast Feed Milling MILLING INSERTS
Dimensions
APMX
RE

Tough 1 Hard Recommended
Machining Data

Designation W1 RE S INSL APMX AE fz
1.9 (mm/t)
HP ANKT 0702R12T-FF 4.40 1.20 2.60 8.55 0.70 1.9
• • 0.70-1.00
HP ANKT 0702R12GTFF (1) 4.40 1.20 2.60 8.55 0.70 • 0.70-1.00

• Can be used on 12 mm and larger tools • For cutting speed recommendations, see pages 542-547
(1) Reinforced cutting-edge geometry for Fast Feed (FF) hardened materials up to 64 HRc
For tools, see pages: HP E90AN-07 (17) • HP E90AN-M-07 (17) • HP E90AN-MM-07 (18) • HP F90AN-07 (195)

APMX
RE 1.2

S1
S
FFT3 TXMT 02 RE IC
Triangular Miniature Inserts
for Fast Feed Milling at Rd°
Small Depths of Cut

Dimensions INSL

Tough 1 Hard Recommended Machining Data

Designation INSL IC RE S S1 IC830 ap fz
IC808 (mm) (mm/t)
0.20-0.60 0.20-0.45
FFT3 TXMT 020105T 3.66 2.00 0.50 1.10 1.56 • •

• For side plunging, the initial cutting feed is 0.06 mm/t • For cutting speed recommendations, see pages 542-547

For tools, see pages: FFT3 EFM-02 (292) • FFT3 EFM-MM 02 (292)

Application Range FFT3-02 (mapm) Pocket milling
0.8
(mapm) Face and profile milling
0.8

0.6 0.6

0.4 0.4

0.2 0.2

0.2 0.4 0.6 0.8 1.0 fz (mm/t) 0.2 0.4 0.6 0.8 1.0 fz (mm/t)

445