Page 153 - MILLING CATALOG p319-550

H690 WNHU/WNMU 0705 ICIC330
Trigonal Inserts with 6 IC845
Helical Cutting Edges for APMX L IC830 Rd°
90° Shoulder Milling S BS RE IC5400
IC808 Recommended
Dimensions IC810Tough 1 HardMachining Data
IC5100
ap fz
MILLING INSERTS
Designation L APMX IC S RE BS (mm) (mm/t)
• 1.20-7.00 0.10-0.20
H690 WNHU 0705PNTR (1) 7.30 7.00 11.50 5.80 0.80 1.20 • • 1.20-7.00 0.10-0.35
H690 WNMU 0705-PNTR (2) 7.30 7.00 11.50 5.90 0.80 1.20 • 1.60-7.00 0.10-0.35
H690 WNMU 070512PNTR 7.30 7.00 11.50 5.80 1.20 1.00 • 2.00-7.00 0.10-0.35

H690 WNMU 070516PNTR 7.30 7.00 11.50 5.80 1.60 0.60 • 2.40-7.00 0.10-0.35

H690 WNMU 070520PNTR 7.30 7.00 11.50 5.70 2.00 - • ••

H690 WNMU 0705PNN-MM (3) 7.30 7.00 11.50 5.90 0.80 - 1.20-7.00 0.10-0.25
• 1.60-7.00 0.10-0.25
H690 WNMU070512PNN-MM (3) 7.30 7.00 11.50 5.80 1.20 - • 2.00-7.00 0.10-0.25

H690 WNMU070516PNN-MM (3) 7.30 7.00 11.50 5.70 1.60 - • 2.40-7.00 0.10-0.25

H690 WNMU070520PNN-MM (3) 7.30 7.00 11.50 5.70 2.00 - • • • 1.20-7.00 0.10-0.25

H690 WNMU 0705PNR-MM (4) 7.30 7.00 11.50 5.90 0.80 1.20 • 1.20-7.00 0.15-0.40

H690 WNMU 0705PNR-RM (5) 7.30 7.00 11.50 5.80 0.80 1.20

• For cutting speed recommendations, see pages 542-547

(1) Peripherally ground

(2) General use insert with 6 right-hand cutting edges for milling a variety of cast iron and steel grades.

(3) 6 neutral cutting edges, for machining steel, can be used also for left-hand specially tailored milling tools.

(4) 6 right-hand cutting edges, used mainly for milling steel
(5) For heavy roughing applications

For tools, see pages: H690 EWN-07 (16) • H690 FWN-07 (195)

PNN-MM PNTR PNR-MM PNR-RM

W1

H490 ANKX/ANCX-09 3 L
Double-Sided Rectangular Inserts 1
with 4 Helical Cutting Edges

BS RE S

Dimensions Tough 1 Hard Recommended
Machining Data

Designation W1 L S RE BS IC330 ap fz
IC830
IC5400 (mm) (mm/t)
IC380 0.80-8.00 0.08-0.15
IC808 1.20-8.00 0.08-0.15
IC810 1.60-8.00 0.08-0.15
IC5100 2.00-8.00 0.08-0.15
1.20-8.00 0.10-0.18
H490 ANCX 090404PDR 6.50 8.52 5.20 0.40 4.80 • •
H490 ANCX 090408PDR 6.50 8.52 5.20 0.80 4.40 • • •••
H490 ANCX 090412PDR 6.50 8.52 4.80 1.20 4.20 • ••
• ••
H490 ANCX 090416PDR 6.50 8.52 4.70 1.60 3.60 •• •
5.00 • • •
H490 ANKX 090408PNTR 6.50 8.52 5.20 0.80

• ANKX-Utility inserts, ANCX-Precision inserts • For cutting speed recommendations, see pages 542-547

For tools, see pages: H490 ANK-09 (235) • H490 E90AX-09 (20) • H490 E90AX-M (20) • H490 E90AX-MM (21) • H490 F90AX-09 (197)

469