Page 188 - MILLING CATALOG p319-550
P. 188
MILLING INSERTSS890 SNMU 1305PN... S
IC330Double-Sided Square Inserts
IC830with 8 Cutting EdgesL/IC APMX
IC5400BS RE
IC808
IC810DimensionsTough 1 HardRecommended
IC5100 Machining Data
Designation L S APMX BS RE(5) ap fz
13.00
S890 SNMU 1305PNTR (1) 13.00 5.60 9.00 1.80 0.80 • • • • • • (mm) (mm/t)
S890 SNMU 1305PNTN (2) 13.00 0.80 • • 2.00-9.00 0.10-0.20
S890 SNMU 1305PNR-MM (3) 13.00 5.70 9.00 1.80 0.80 • • • 2.00-9.00 0.10-0.20
S890 SNHU 1305PN-R-W (4) 0.80 • 2.00-9.00 0.18-0.30
5.60 9.00 1.80 0.50-2.00 0.10-0.20
5.15 5.00 10.40
• For cutting speed recommendations, see pages 542-547
(1) General use, 8 right-hand cutting edges, for milling a variety of cast iron and steel workpiece materials.
(2) 8 neutral cutting edges, used for machining cast iron. Can be used for left-hand specially tailored milling cutters.
(3) 8 right-hand cutting edges, used mainly for milling steel (R.H. helix).
(4) Wiper insert with 4 right-hand cutting edges that provides substantially improved surface finish
(5) 1.2 & 2.0 corner radii - on request.
For tools, see pages: S890 FSN-13 (205) • S890 SSB-13 (362)
PNTR (1) PNTN (2) PNR-MM(3) PN-R-W (4)
ONHU/ONMU-05 IC
Double-Sided Octagonal Inserts
with 16 Cutting Edges A
45°
BS APMX
RE / A S
Dimensions Tough 1 Hard Recommended
Machining Data
Designation BS IC APMX S RE IC330 ap fz
4.50 13.00 3.50 5.08 IC830
ONHU 050500-PL (1) 4.50 13.00 3.50 5.08 IC5400 (mm) (mm/t)
ONHU 050500-R-HP 5.00 13.00 3.50 5.08 IC808 1.50-3.00 0.15-0.20
ONHU 050505-TN (2) 5.00 13.00 3.50 5.08 IC810 1.50-3.00 0.20-0.25
ONHU 050505-TN-MM (3) 5.00 13.00 3.50 5.08 DT7150 1.50-3.00 0.15-0.30
ONMU 050505-TN (2) 5.00 13.00 3.50 5.08 IC5100 1.50-3.00 0.20-0.30
ONMU 050505-TN-MM (3) 1.50-3.00 0.20-0.30
- •• 1.50-3.00 0.20-0.30
-•
0.50 • • ••
0.50 • • •
0.50 • • •
0.50 • • • •
• ONHU - Precision ground • ONMU - Utility • For cutting speed recommendations, see pages 542-547
(1) For stainless steel and high temperature alloys
(2) For cast iron
(3) For general applications
For tools, see pages: FF SOF (310) • SOE45 8/16 (38) • SOF45 (222)
TN TN-MM PL
For cast iron For general applications For stainless steel and
high temperature alloys
504 ISCAR