Page 193 - MILLING CATALOG p319-550
P. 193
ONMU/ONHU 0706 IC S IC330
Double-Sided Octagonal Inserts IC845
with 16 Cutting Edges APMX IC830
BS RE IC5400
Dimensions IC808 Recommended
L IC810Machining Data
IC5100
Tough 1 Hard
MILLING INSERTS
ap fz
Designation IC BS L APMX S RE (mm) (mm/t)
5.00 6.50 0.00 •
ONHU 070600-PL-R 18.80 1.30 7.00 5.00 6.50 1.50-5.00 0.15-0.30
ONHU 070610-TL (1) 18.80 1.50 7.00 5.00 6.50 1.00 • 1.50-5.00 0.15-0.30
ONHU 070610-TR (2) 18.80 1.50 7.00 5.00 6.50 1.00 • • 1.50-5.00 0.15-0.30
5.00 6.80 1.00 •
ONHU 070610-TR-MM 18.80 1.50 7.00 5.00 6.50 1.00 • • 1.50-5.00 0.15-0.30
18.80 1.00 7.00 5.00 6.50
ONMU 070610 AR-HP 18.80 1.50 7.00 5.00 6.50 1.50-5.00 0.15-0.30
ONMU 070610-TR (2) 1.00 • • 1.50-5.00 0.15-0.30
1.00 • • • • •
ONMU 070610-TR-MM 18.80 1.50 7.00 1.50-5.00 0.15-0.30
ONMU 070616-RM (3) 18.80 1.20 7.00 1.60 • • 1.50-5.00 0.15-0.40
• For cutting speed recommendations, see pages 542-547
(1) For cast iron (left-hand)
(2) For cast iron
(3) Reinforced land for heavy machining
For tools, see pages: SOF45-R18 (229)
ONHU 0706AN-R-W IC S
Double-Sided Octagonal Wiper
Inserts with 8 Right-Hand APMX
Cutting Edges BS
Dimensions Recommended Machining Data
IC810 ap fz
(mm/t)
Designation IC S BS APMX (mm) 0.10-0.20
ONHU 0706AN-R-W 18.80 6.50 0.50-2.00
6.80 5.00 •
• Note : this insert is not intended for mounting on a cutter carrying inserts ONHU 070600-PL-R • For cutting speed recommendations, see pages 542-547
For tools, see pages: SOF45-R18 (229)
ONMU 1008 IC S
Double-Sided Heavy Duty
Octagonal Inserts with APMX
16 Cutting Edges RE BS
Dimensions Tough 1 Hard Recommended
Machining Data
IC830 ap fz
IC5400
IC808
IC810
IC5100
Designation IC BS APMX S RE (mm) (mm/t)
7.00 9.30 ••
ONMU 100816-N-HL 26.30 9.60 7.00 9.30 1.60 2.00-7.00 0.25-0.40
ONMU 100816-N-RM 26.30 9.60 1.60 • • •
2.00-7.00 0.25-0.40
• For cutting speed recommendations, see pages 542-547
For tools, see pages: SOF45-26 (228) • SOF45WG-R26 (228)
509