Page 189 - MILLING CATALOG p319-550

ONHU 0505-W IC IC808 A
Double-Sided Octagonal Wiper IC810
Inserts with 4 or 8 Cutting Edges 45°
MILLING INSERTS22.5°

APMX

A S

BS

Dimensions Tough 1 Hard Recommended Machining Data

Designation IC APMX S BS • ap fz
•• (mm) (mm/t)
ONHU 0505AN-N-W (1) 13.00 2.00 4.90 4.70 0.50-2.00 0.15-0.30
ONHU 0505AN-R-W (2) 13.00 2.00 4.90 4.50 0.50-2.00 0.15-0.30

• To be used with ONMU/ONHU 05 inserts • For cutting speed recommendations, see pages 542-547
(1) Wiper insert with 4 right- and 4 left-hand cutting edges
(2) Wiper insert with 8 right-hand cutting edges
For tools, see pages: SOE45 8/16 (38) • SOF45 (222)

OXMT 0507 OXMT 0507R08-FF OXMT 050705-R-HP
Octagonal High Feed 45° Inserts IC L

15° S IC 45°
BS L APMX BS APMX

Dimensions Tough 1 Hard Recommended Machining Data

Designation APMX IC BS S L IC830 ap fz
7.00 5.00 IC808
7.00 (mm) (mm/t)
OXMT 0507R08-FF (1) 1.20 14.50 0.80 4.30 • • 0.50-1.20 0.50-1.80
0.50-2.50 0.12-0.30
OXMT 050705-R-HP (2) 2.70 15.10 1.24

• To be used without a seat • For cutting speed recommendations, see pages 542-547
(1) For high feed milling
(2) 45° edges for austenitic stainless steel and high temperature alloys
For tools, see pages: FF SOF (310) • SOE45 8/16 (38) • SOF45 (222)

-FF -HP

OECR IC
Octagonal Milling Inserts
with Positive Rake and 45° APMX
Sharp Cutting Edges BS RE

S

Dimensions Tough 1 Hard Recommended
Machining Data

IC28 ap fz
IC830
Designation IC APMX BS RE S IC928 (mm) (mm/t)
1.60 IC808
1.60
OECR 060405AER 14.45 3.70 0.50 4.90 • 1.00-3.70 0.12-0.20
OECR 060405AER-P (1) 14.45 3.70 0.50 4.90 • • •
1.00-3.70 0.08-0.20

• For cutting speed recommendations, see pages 542-547

(1) Polished rake used for aluminum and titanium

For tools, see pages: HOE-R06 (218) • HOF-R06 (218)

505