Page 185 - MILLING CATALOG p319-550

S845 SNHU 1305-W 17.3 IC IC808 45°
Double-Sided Wiper Inserts BS IC81022.5°
with 4 Cutting Edges 5.35
S MILLING INSERTSRecommended Machining Data
Dimensions
Tough 1 Hard

ap fz

Designation IC S BS (mm) (mm/t)
8.10 • • 0.80-3.00
S845 SNHU 1305AN-N-W 13.00 5.90 0.10-0.20

• Wiper insert with 4 cutting edges: 2 right- and 2 left-hand to be used with S845 SNMU/SNHU 13.. inserts • For cutting speed recommendations, see pages 542-547

For tools, see pages: SOE45 8/16 (38) • SOF45 (222)

S845 SXMU/SXCU-16 A IC
Square Thick Inserts with 8 RE
Helical Right-Hand Cutting Edges
A-A A APMX
BS S

Dimensions Tough 1 Hard Recommended
Machining Data

Designation L S BS RE APMX IC330 ap fz
IC328
IC830 (mm) (mm/t)
IC928 3.00-7.00 0.30-0.50
IC5400 3.00-7.00 0.30-0.50
IC808 3.00-7.00 0.20-0.35
IC908
IC810
IC910
DT7150
IC5100
IC4100

S845 SXMU 1606ADTR-MM 16.35 7.45 2.84 0.80 7.15 •••••••••••
••
S845 SXMU 1606ADTR-RM 16.35 7.45 2.84 0.80 7.15 • •
S845 SXCU 160608AD-RMM 16.35 7.45 2.84 0.80 7.15 •

• When a wiper insert is being used, recommended ap=0.8-3.0 mm, fz=0.1-0.25 mm/t . • For cutting speed recommendations, see pages 542-547
For tools, see pages: S845 F45SX-16 (227)

S845 SXHU 1606-W 21 IC
HELIDO Wiper Insert with
a Single Cutting Edge

BS S

Dimensions Recommended Machining Data

IC808 ap fz
(mm/t)
Designation IC S BS APMX (mm) 0.20-0.35
3.00 • 0.80-3.00
S845 SXHU 1606AD-R-W 16.20 6.44 10.00

• When a wiper insert is being used, recommended ap=0.8-3.0 mm, fz=0.1-0.25 mm/t • For cutting speed recommendations, see pages 542-547
For tools, see pages: S845 F45SX-16 (227)

501