Page 186 - MILLING CATALOG p319-550

MILLING INSERTS S845 SNMU/SNHU 1806 S
Square Inserts with 8 Helical IC
Right-Hand Cutting Edges

BS APMX
L RE

Dimensions Tough 1 Hard Recommended
Machining Data

IC330 ap fz
IC845
Designation IC BS CW RE APMX S IC830 (mm) (mm/t)
3.50 IC5400
3.50 IC808
3.50 IC810
3.50 IC5100
3.50
S845 SNMU 1806ANR 18.80 2.40 1.00 8.00 7.00 • 1.50-8.00 0.15-0.30
S845 SNMU 1806ANR-MM 18.80 2.40 1.00 8.00 7.00 • • • • •
18.80 2.30 1.50-8.00 0.15-0.30
S845 SNMU 1806ANR-RM 18.80 2.40 • • 1.50-8.00 0.20-0.40
18.80 2.40 1.60 8.00 7.00 • • 1.50-8.00 0.15-0.30
S845 SNHU 1806ANR
S845 SNHU 1806ANR-MM 1.00 8.00 7.00 •

1.00 8.00 7.00 1.50-8.00 0.15-0.30

• For cutting speed recommendations, see pages 542-547
For tools, see pages: SOF45-R18 (229)

S845 SNHU 1806AN-N-W s
Wiper Insert with 2 R.H. and IC
2 L.H. Cutting Edges
APMX
BS RE

Dimensions Recommended Machining Data

Designation IC S BS APMX IC810 ap fz
S845 SNHU 1806AN-N-W 18.80 (mm) (mm/t)
7.00 10.00 8.00 • 0.50-2.00 0.10-0.25
For tools, see pages: SOF45-R18 (229)

S845 SNMU 2608 S
Heavy Duty Thick Square Inserts IC
with 8 Helical Right-Hand
Cutting Edges APMX
RE BS
Dimensions Recommended
Tough 1 Hard Machining Data

IC830 ap fz
IC5400
Designation IC BS RE APMX S IC808 (mm) (mm/t)
S845 SNMU 2608ANR-HL 26.30 2.60 IC810
S845 SNMU 2608ANR-RM 26.30 2.60
1.60 11.00 10.90 • 2.00-11.00 0.25-0.40
1.60 11.00 10.90 • • •
2.00-11.00 0.25-0.40

• For cutting speed recommendations, see pages 542-547

For tools, see pages: SOF45-26 (228) • SOF45WG-R26 (228)

502 ISCAR