Page 85 - TURNING CATALOG p121-254
P. 85
TPGT-SP 60° 91º 95º ISOTURN INSERTS
Super Positive Triangular Inserts S
with 11° Clearance for Fine
Boring and Finish Turning IC
L
D1
11˚
RE
Dimensions Tough 1 Hard Recommended Machining Data
IC908 ap f
IC907
Designation L IC S RE D1 (mm) (mm/rev)
0.20 ••
TPGT 110202-SP 11.00 6.35 2.38 3.00 0.40-1.00 0.05-0.15
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: E-STFPR-HEAD (116)
60° 91º 91º 91º
TPMR-FTF L
Triangular 11° Positive Inserts
with a Positive Chipformer RE 11° S
Exerting, Low Cutting Forces IC
for Finish Turning Applications
Dimensions Recommended Machining Data
Designation L IC S RE IC20N ap f
TPMR 110304-FTF 11.00 6.35 3.18 0.40 • (mm) (mm/rev)
0.40 • 0.50-3.00 0.07-0.25
TPMR 160304-FTF 16.50 9.52 3.18 0.50-3.00 0.07-0.25
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: CTFPR/L (75) • CTGPR/L (74) • S-CTFPR/L (116)
60° 91º 95º
TPMT L
Triangular 11° Positive Inserts
with a Positive Chipformer D1
Exerting Low Cutting Forces
for Internal Finish Turning RE IC 11°
S
Dimensions Tough 1 Hard Recommended
Machining Data
IC830 ap f
IC635
Designation L IC S RE D1 IC50M (mm)(1) (mm/rev)(2)
IC8350
TPMT 110202 IC8250
TPMT 110204 IC8150
TPMT 110208 IC520M
TPMT 160304 IC20
TPMT 160308 IC806
IC807
IC907
11.00 6.35 2.38 0.20 3.00 • • • 0.20-2.00 0.05-0.25
11.00 6.35 2.38 0.40 3.00 • • • • • • 1.00-3.00 0.12-0.30
11.00 6.35 2.38 0.80 3.00 • •• • 1.00-4.00 0.15-0.30
16.50 9.52 3.18 0.40 4.30 • •• • • • 1.00-4.00 0.12-0.30
16.50 9.52 3.18 0.80 4.30 • • • • • • • • • 5.00-12.00 0.15-0.35
• For cutting speed recommendations, see pages ..
(1) For turning
(2) For turning
For tools, see pages: A/E/S-STFPR/L (117) • A/S-STLPR/L (118) • E-STFPR-HEAD (116)
TPMT-PF 60° 91º 95º
Triangular 11° Positive L
Inserts for Semi-Finishing 11°
and Finishing Applications D1
RE IC S
Dimensions Recommended Machining Data
Designation L IC(1) S RE D1 IC8150 ap f
0.40 (mm) (mm/rev)
TPMT 110204-PF 11.00 6.35 2.38 3.00 • 0.50-3.00 0.10-0.30
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
(1) Actual di=6.28, to be used in 6.35mm pocket size
For tools, see pages: A/E/S-STFPR/L (117) • A/S-STLPR/L (118) • E-STFPR-HEAD (116)
205