Page 45 - TURNING CATALOG p255-458

P. 45

GIA-K (long pocket) ±0.025 30 Ref. IC5010
Flat Top Precision IC428
Double-Ended Inserts with CDX 15° 6.4
T-Land for Machining Cast Iron 7° GROOVE-TURN

DAXN BW

Dimensions Tough 1 Hard Recommended Machining Data

ap f turn f groove

Designation CW RE CWTOL(1) RETOL(2) BW CDX(3) DAXN(4) (mm) (mm/rev) (mm/rev)
8.00 0.80 0.02 0.050 6.00 25.00 160.0 • • 1.00-4.80 0.36-0.64 0.18-0.38
GIA 8.00K-0.80 8.00 1.20 0.02 0.050 6.00 25.00 160.0 • • 1.45-4.80 0.36-0.70 0.18-0.38
GIA 8.00K-1.20

• DMIN for internal machining = 65 mm • For cutting speed recommendations and user guide, see pages 419-428, 432-436

(1) Cutting width tolerance (+/-)

(2) Corner radius tolerance (+/-)

(3) Cutting depth maximum

(4) Minimum axial grooving diameter

For tools, see pages: C#-GHDR/L (274) • CGHN-8-10D (287) • GADR/L-8 (286) • GADR/L-JHP (287) • GAFG-R/L-8 (580) • GHDR/L (long pocket) (285)

• GHDR/L-JHP (long pocket) (285) • GHFG-R/L-8 (579) • GHFGR/L-8 (579) • GHIR/L (W=7.0-8.3) (355)

0.15 0.2 ±0.025
30° 20°
GITM 7°
CBN Tipped Inserts for IB20H IB50 / IB10H
Turning and Grooving on 15 Ref.
Hard Ferrous Materials
CW BW
RE
HARD MATERIALS
Dimensions Tough 1 Hard Recommended Machining Data

IB20H ap f turn f groove
IB50
Designation CW RE RETOL(1) CWTOL(2) BW IB10H (mm) (mm/rev) (mm/rev)
0.02-0.05
GITM 3.00K-0.20 3.00 0.20 0.050 0.02 2.40 ••• 0.00-0.30 0.02-0.07 0.02-0.07
GITM 4.00K-0.20 4.00 ••• 0.03-0.10
GITM 5.00K-0.40 5.00 0.20 0.050 0.02 3.20 ••• 0.00-0.40 0.03-0.09 0.04-0.12
GITM 6.00K-0.40 6.00 0.05-0.16
GITM 8.00K-0.40 8.00 0.40 0.050 0.02 4.00 ••• 0.00-0.50 0.05-0.13

0.40 0.050 0.02 4.95 • 0.00-0.60 0.05-0.15

0.40 0.050 0.02 6.00 0.00-0.80 0.07-0.20

• DMIN for internal machining = 70 mm • For cutting speed recommendations and user guide, see pages 419-428, 432-436

(1) Corner radius tolerance (+/-)

(2) Cutting width tolerance (+/-)

For tools, see pages: Anti-Vibration Blades (268) • C#-GHDR/L (259) • CGHN 26-M (340) • CGHN 32-DGM (342) • CGHN 32-M (341)

• CGHN-D (266) • CGHN-DG (267) • CGHN-S (266) • CGPAD (265) • CGPAD-JHP (265) • GHDR/L (short pocket) (259) • GHDR/L-JHP (short pocket) (260)

• GHDR/L-JHP-MC (short pocket) (261) • GHGR/L (262) • GHMPR/L (258) • GHMR/L (258) • GHSR/L (357) • GHSR/L-JHP-SL (358)

0.15 0.2 ±0.025
30°
GITM (full radius) 20°
Full Radius CBN Tipped Inserts IB20H
for Grooving and Turning on 7°
Hard Ferrous Materials
IB50 / IB10H 15 Ref.

DAXN 200° BW
RE CW
HARD MATERIALS
Dimensions Tough 1 Hard Recommended Machining Data

IB20H ap f turn f groove
IB50
RE CWTOL(1) RETOL(2) BW IB10H (mm/rev)
Designation CW 1.50 0.02 0.050 2.40 DAXN(3) (mm) (mm/rev) 0.02-0.06
3.00 2.00 0.02 0.050 3.20 0.00-0.30 0.03-0.10 0.02-0.09
GITM 3.00K-1.50 4.00 2.50 0.02 0.050 3.90 160.0 • • • 0.00-0.40 0.04-0.14 0.03-0.11
GITM 4.00K-2.00 5.00 3.00 0.02 0.050 5.00 160.0 • • • 0.00-0.50 0.05-0.18 0.04-0.13
GITM 5.00K-2.50 6.00 4.00 0.02 0.050 5.60 160.0 • • 0.00-0.60 0.06-0.22 0.05-0.17
GITM 6.00K-3.00 8.00 160.0 • • • 0.00-0.80 0.08-0.29
GITM 8.00K-4.00 160.0 •