Page 47 - TURNING CATALOG p255-458

GIPA (full radius W=3-6) ±0.025 IC20 5
Precision Double-Ended IC806
Inserts with Polished Top Rake 7° IC4
for Machining Aluminum 15 Ref. ID5

CW GROOVE-TURN
RE BW

Dimensions Tough 1 Hard Recommended Machining Data

ap f turn f groove

Designation CW RE CWTOL(4) RETOL(5) BW (mm) (mm/rev) (mm/rev)
3.00 1.50 0.02 0.050 2.40 • 0.08-0.16
GIPA 3.00-1.50 3.00 0.00-1.50 0.15-0.30 0.09-0.19
GIPA 3.00-1.50-D (1) 4.00 • 0.00-1.50 0.19-0.36 0.10-0.22
GIPA 4.00-2.00 4.00 1.50 0.02 0.050 2.40 0.12-0.26
GIPA 4.00-2.00-D (1) 4.00 2.00 0.02 0.050 3.20 • • 0.12-0.26
GIPA 4.00-2.00YZ-D (2) 5.00 0.00-2.00 0.20-0.43 0.09-0.24
GIPA 5.00-2.50 5.00 • 0.00-2.00 0.25-0.53 0.11-0.30
GIPA 5.00-2.50-D (1) 5.00 2.00 0.02 0.050 3.20 • 0.00-2.00 0.25-0.53 0.11-0.30
GIPA 5.00-2.50YZ-D (2) 6.00 0.11-0.29
GIPA 6.00-3.00 6.00 2.00 0.02 0.050 3.20 0.13-0.36
GIPA 6.00-3.00-D (1) 6.00 2.50 0.02 0.050 3.90 • • 0.11-0.29
GIPA 6.00-3.00YZ 6.00 0.00-2.50 0.21-0.48 0.13-0.36
GIPA 6.00-3.00YZ-D (2) 6.00 • 0.00-2.50 0.22-0.60 0.11-0.29
GIPA 6.00-3.00CB (3) 2.50 0.02 0.050 3.90 • 0.00-2.50 0.22-0.60

2.50 0.02 0.050 3.90
3.00 0.02 0.050 4.80 • •
0.00-3.00 0.21-0.58
• 0.00-3.00 0.26-0.72
3.00 0.02 0.050 4.80
3.00 0.02 0.050 4.80 •
0.00-3.00 0.21-0.58
• 0.00-3.00 0.26-0.72
3.00 0.02 0.050 4.80 • 0.00-3.00 0.21-0.58

3.00 0.02 0.050 4.80

• For cutting speed recommendations and user guide, see pages 419-428, 432-436

(1) Single-ended PCD tipped insert

(2) Single-ended molded PCD chipformer tipped insert

(3) Single-ended flat PCD tipped insert with chip deflector

(4) Cutting width tolerance (+/-)

(5) Corner radius tolerance (+/-)

For tools, see pages: Anti-Vibration Blades (284) • C#-GHDR/L (274) • CGHN 26-M (356) • CGHN 32-DGM (358) • CGHN 32-M (357)

• CGHN-D (283) • CGHN-DG (283) • CGHN-S (282) • CGPAD (281) • CGPAD-JHP (282) • GHDKR/L (446) • GHDR/L (short pocket) (275)

• GHDR/L-JHP (short pocket) (276) • GHDR/L-JHP-MC (short pocket) (277) • GHGR/L (278) • GHIFR/L-A (445) • GHIUR/L-C-A (15° & 27.5°) Bars (444)

• GHIUR/L-UC (444) • GHMPR/L (273) • GHMR/L (273) • GHSR/L (373) • GHSR/L-JHP-SL (374) • NQCH-GHSR/L-JHP (374)

301