Page 23 - FAST_FEED_MILL_Brochure_INCH_2022
P. 23
LF OAL
FFQ4 D-M-09 DCX DC THSZMS DCONMS Rd°
Fast Feed Endmills with
FLEXFIT Threaded Adaptation
Carrying Single-Sided Inserts 12˚ APMX DRVS
with 4 Cutting Edges
Designation DCX (1) DC APMX AE (2) CICT (3) THSZMS LF OAL DCONMS RMPX° (4) MDN (5) MDX (6) DRVS (7) MIID (8) TQ (9) TQ_3 (10) Lbs
FFQ4 D1.50-05-M16-09 1.500 .933 .0470 .280 5 M16 1.400 2.400 1.142 2.3 2.433 2.961 .984 FFQ4 SOMT 090412T 17.70 355 .39
• To generate a straight surface without cusps, the width of cut must not exceed DC • Radius for programming: for insert SOMT .098", for insert SOMW .118" • When
mounting insert SOMW, APMX=.039" • For slot milling or machining with high tool overhang, the maximum depth of cut should be reduced by 50%
(1) Cutting diameter maximum
(2) Maximum plunging width
(3) Number of inserts
(4) Maximum ramping angle
(5) Machinable diameter minimum for interpolation
(6) Machinable diameter maximum for interpolation
(7) Torque key size
(8) Master insert identification
(9) Recommended tightening torque (lbf*in) for insert screw
(10) Tool tightening torque (lbfxin)
Spare Parts
Designation
FFQ4 D-M-09 SR M3X0.5-L7.4 IP9 (a) IP-9/151
(a) Recommended tightening torque:17.7 lbf*in
OAL
FFQ4 D-W-09 LH
Fast Feed Endmills Carrying Rd°
Single-Sided Inserts with DCX DC DCONMS
4 Cutting Edges
APMX
12˚
Designation DCX (1) DC APMX AE (2) CICT (3) LH DCONMS OAL RMPX° (4) MDN (5) MDX (6) MIID (7) TQ (8) Lbs
FFQ4 D0.87-2-1.7-W0.75-09 .875 .311 .0470 .280 2 1.750 .750 3.800 8.0 1.186 1.711 FFQ4 SOMT 090412T 17.70 .39
FFQ4 D1.00-3-2.0-W1.00-09 1.000 .437 .0470 .280 3 2.000 1.000 4.300 5.4 1.437 1.961 FFQ4 SOMT 090412T 17.70 .74
FFQ4 D1.25-4-2.5-W1.00-09 1.250 .689 .0470 .280 4 2.500 1.000 4.800 3.3 1.939 2.461 FFQ4 SOMT 090412T 17.70 .91
FFQ4 D1.50-5-3.0-W1.25-09 1.500 .938 .0470 .280 5 3.000 1.250 5.300 2.2 2.438 2.961 FFQ4 SOMT 090412T 17.70 1.55
• To generate a straight surface without cusps, the width of cut must not exceed DC • Radius for programming: for insert SOMT .098", for insert SOMW .118" • When
mounting insert SOMW, APMX=.039" • For slot milling or machining with high tool overhang, the maximum depth of cut should be reduced by 50%
(1) Cutting diameter maximum
(2) Maximum plunging width
(3) Number of inserts
(4) Maximum ramping angle
(5) Machinable diameter minimum for interpolation
(6) Machinable diameter maximum for interpolation
(7) Master insert identification
(8) Recommended tightening torque (lbf*in) for insert screw
Spare Parts
Designation
FFQ4 D-W-09 SR M3X0.5-L7.4 IP9 (a) IP-9/151
(a) Recommended tightening torque:17.7 lbf*in
23