Page 24 - FAST_FEED_MILL_Brochure_INCH_2022
P. 24
DCONMS
DHUB
FFQ4 D-09
Fast Feed Face Mills Rd°
Carrying Single-Sided Inserts OAL
with 4 Cutting Edges
12°
DC
DCX APMX
Designation DCX (1) DC APMX AE (2) CICT (3) OAL DCONMS DHUB Arbor RMPX° (4) MDN (5) MDX (6) MIID (7) TQ (8) Lbs
FFQ4 D1.50-05-0.50-09 1.500 .933 .0470 .280 5 1.400 .500 1.417 A 2.2 2.433 2.961 FFQ4 SOMT 090412T 17.70 .38
FFQ4 D2.00-07-0.75-09 2.000 1.439 .0470 .280 7 1.600 .750 1.850 A 1.5 3.439 3.961 FFQ4 SOMT 090412T 17.70 .77
FFQ4 D2.50-08-1.00-09 2.500 1.937 .0470 .280 8 1.850 1.000 2.252 A 1.1 4.437 4.961 FFQ4 SOMT 090412T 17.70 1.38
• To generate a straight surface without cusps, the width of cut must not exceed DC • Radius for programming: for insert SOMT .098", for insert SOMW .118" • When
mounting insert SOMW, APMX=.039" • For slot milling or machining with high tool overhang, the maximum depth of cut should be reduced by 50%
(1) Cutting diameter maximum
(2) Maximum plunging width
(3) Number of inserts
(4) Maximum ramping angle
(5) Machinable diameter minimum for interpolation
(6) Machinable diameter maximum for interpolation
(7) Master insert identification
(8) Recommended tightening torque (lbf*in) for insert screw
Spare Parts
Designation
FFQ4 D1.50-05-0.50-09 SR M3X0.5-L7.4 IP9 (a) IP-9/151
FFQ4 D2.00-07-0.75-09 SR M3X0.5-L7.4 IP9 (a) IP-9/151 SR UNF 3/8X1 B18.3
FFQ4 D2.50-08-1.00-09 SR M3X0.5-L7.4 IP9 (a) IP-9/151 SR UNF 1/2X1¼ B18.3
(a) Recommended tightening torque:17.7 lbf*in
24 FAST FEED MILLING