Page 59 - MILLING_CATALOG_INCH_2022_P1-P92
P. 59
CW DC
MM SS THSZMS
Interchangeable Solid Carbide
Heads for Milling Involute Spline
Shafts According to DIN 5480
PDX
Dimensions
IC528
Designation Module (1) T range (2) DC PDX CW NOF (3) THSZMS
MM SS22M100Z1720-4T08 1.00 17-20 .854 .11 .217 4 T08 MM EGR 20-22* •
MM SS22M100Z2125-4T08 1.00 21-25 .854 .09 .177 4 T08 MM EGR 20-22* •
MM SS22M150Z1720-4T08 1.50 17-20 .854 .11 .213 4 T08 MM EGR 20-22* •
• MM EGR 20-22 clamping keys are supplied with each MM GRT... shanks • Tightening torque 130 Lbfxin • Do not apply lubricant to the threaded connection.
• For clamping instructions, see pages 91-92 • For user guide, see pages 37,219-228 • For shanks, see pages 83-90 ENDMILLS • SOLID CARBIDE • MULTI-MASTER
(1) Value in mm
(2) Teeth range
(3) Number of flutes
* Optional, to be ordered separately
55˚
DC RE
MM TRF 55°
Interchangeable Solid Carbide
Milling Heads for 55° Partial
Profile Thread Milling THSZMS PDX
Dimensions
IC908
Designation DC NOF (1) TPIN (2) TPIX (3) RE PDX THSZMS TDZ (4) DMIN TQ (5)
MM TRF12-W55-P11-5T05 .470 5 11.00 14.00 .0091 .0452 T05 15.875 .535 61.96 •
MM TRF12-W55-P19-5T05 .470 5 19.00 28.00 .0043 .0295 T05 14.287 .516 88.51 •
MM TRF16-W55-P8-5T06 .628 5 8.00 14.00 .0091 .0610 T06 20.637 .720 132.76 •
MM TRF20-W55-P6-6T08 .785 6 6.00 8.00 .0157 .0767 T08 25.4 .839 247.82 •
• For ISO metric thread (ISO 68, DIN13, ANSI B 1.13M-1983) • For shanks, see pages 83-90 • For clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection.
(1) Number of flutes
(2) Threads per inch minimum
(3) Threads per inch maximum
(4) Smallest possible thread
(5) Tightening torque
Spare Parts
Designation
MM TRF12-W55-P11-5T05 BIT SOCKET T20 3/8" DRIVE*
MM TRF12-W55-P19-5T05 BIT SOCKET T20 3/8" DRIVE*
MM TRF16-W55-P8-5T06 BIT SOCKET T25 3/8" DRIVE*
MM TRF20-W55-P6-6T08 BIT SOCKET T40 3/8" DRIVE*
* Optional, to be ordered separately
57