Page 62 - MILLING_CATALOG_INCH_2022_P1-P92

Identification Code
ENDMILLS • SOLID CARBIDE • MULTI-MASTER
MT 10 D 6 0.75 ISO MMT05

MULTI- Cutting No. of Cutting Pitch Thread Connection
MASTER Dia. Flutes Length Profile Size
Thread Mill ISO
UN
W (55°)

TP THSZMS

MT-ISO-MM DC
Carbide Milling Heads with
a Threaded Connection for APMX
Internal ISO Metric Thread LF
Application: General engineering
NUT
TP Dimensions
TP/4
60˚
TP/8
SCREW
TP M
Designation mm (1) Coarse M Fine DC NOF (2) APMX LF THSZMS IC908
MT10D7.5 0.5ISO-MMT05 .500 - =>14 .394 4 .295 .502 T05 MM KEY 6X4* •
MT 10D6 0.75ISO-MMT05 .750 - =>12 .394 4 .236 .502 T05 MM KEY 6X4* •
MT 10D6 1.0ISO-MMT05 1.000 - =>12 .394 4 .236 .502 T05 MM KEY 6X4* •
MT 10D5 1.25ISO-MMT05 1.250 - =>14 .394 4 .197 .502 T05 MM KEY 6X4* •
MT 10D6 1.5ISO-MMT05 1.500 - =>14 .394 4 .236 .502 T05 MM KEY 6X4* •
MT 12D8 0.5ISO-MMT06 .500 - =>16 .472 4 .315 .563 T06 MM KEY 8X5* •
MT 12E8 0.75ISO-MMT06 .750 - =>16 .472 5 .327 .563 T06 MM KEY 8X5* •
MT 12E8 1.0ISO-MMT06 1.000 - =>16 .472 5 .315 .563 T06 MM KEY 8X5* •
MT 12D8 1.25ISO-MMT06 1.250 - =>16 .472 4 .295 .563 T06 MM KEY 8X5* •
MT 12D7 1.5ISO-MMT06 1.500 - =>16 .472 4 .299 .563 T06 MM KEY 8X5* •
MT 12D7 1.75ISO-MMT06 1.750 - =>16 .472 4 .280 .563 T06 MM KEY 8X5* •
MT12D8 2.0ISO-MMT06 2.000 M16 =>17 .472 4 .315 .563 T06 MM KEY 8X5* •
MT 16F12 1.0ISO-MMT08 1.000 - =>22 .630 6 .472 .787 T08 MM KEY 10X7* •
MT 16F12 1.5ISO-MMT08 1.500 - =>20 .630 6 .472 .787 T08 MM KEY 10X7* •
MT 16E12 2.0ISO-MMT08 2.000 - =>19 .630 5 .472 .787 T08 MM KEY 10X7* •
MT15.4E13 2.5ISO-MMT08 2.500 M20 =>22 .606 5 .500 .787 T08 MM KEY 10X7* •
MT 16C12 3.0ISO-MMT08 3.000 M24 =>25 .630 3 .476 .787 T08 MM KEY 10X7* •
MT20F14 2.0ISO-MMTT10 2.000 - =>27 .787 6 .472 .827 T10 BIT SOCKET T30 3/8" DRIVE* T-40/3 L* •
MT20D12 3.0ISO-MMTT10 3.000 - =>27 .787 4 .480 .827 T10 BIT SOCKET T40 3/8" DRIVE* T-40/3 L* •
MT20D14 3.5ISO-MMTT10 3.500 - =>30 .787 4 .417 .827 T10 BIT SOCKET T40 3/8" DRIVE* T-40/3 L* •
• Note: Description and dimensions relate to the new products with clamping flats. • For shanks, see pages 83-90 • For clamping keys (to be ordered separately),
tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection
(1) Thread pitch
(2) Number of flutes
* Optional, to be ordered separately

60 ISCAR