Page 71 - MILLING_CATALOG_INCH_2022_P1-P92
P. 71
THSZMS Rd°
MM HC
Interchangeable Solid Carbide
Slot Drill Milling Heads with DCh9 DCONMS
Two 10° Helix Flutes FHA
RE APMX
LF
Economical solution
Dimensions Tough 1 Hard Recommended
Machining Data
IC908 IC903 fz
Designation DC NOF (1) APMX RE Tm (2) THSZMS DCONMS LF FHA (inch/t)
MM HC.312C31R016-2T05 .312 2 .310 .0160 r0-r.064 T05 .297 .390 10.0 • .0010-.0040
MM HC.375C38R016-2T06 .375 2 .380 .0160 r0-r.078 T06 .360 .485 10.0 • .0010-.0040
MM HC100C10R0.4-2T06 .394 2 .354 .0157 r0-3.0 T06 .374 .486 10.0 • • .0012-.0039
MM HC100C10R1.0-2T06 .394 2 .354 .0393 r0-3.0 T06 .374 .486 10.0 • • .0012-.0039
MM HC100C10R2.0-2T06 .394 2 .354 .0787 r0-3.0 T06 .374 .486 10.0 • • .0012-.0039 ENDMILLS • SOLID CARBIDE • MULTI-MASTER
MM HC117C13R0.3-2T08 .461 2 .394 .0118 r0-3.0 T08 .453 .559 10.0 • .0016-.0043
MM HC120C13R0.4-2T08 .472 2 .394 .0157 r0-3.0 T08 .453 .559 10.0 • • .0016-.0043
MM HC120C13R1.0-2T08 .472 2 .394 .0393 r0-3.0 T08 .453 .559 10.0 • • .0016-.0043
MM HC120C13R2.0-2T08 .472 2 .394 .0787 r0-3.0 T08 .453 .559 10.0 • • .0016-.0043
MM HC.500C55R016-2T08 .500 2 .433 .0160 r0-r.126 T08 .453 .600 10.0 • .0016-.0043
MM HC.562C43R016-2T08 .562 2 .460 .0100 r0-r.150 T08 .450 .590 10.0 • .0020-.0050
MM HC.625C63R016-2T10 .625 2 .600 .0160 r0-r.187 T10 .600 .750 10.0 • .0020-.0050
MM HC.625C63R032-2T10 .625 2 .600 .0320 r0-r.187 T10 .600 .750 10.0 • .0020-.0050
MM HC160C16R0.4-2T10 .630 2 .587 .0157 r0-4.0 T10 .598 .750 10.0 • • .0020-.0051
MM HC160C16R0.8-2T10 .630 2 .587 .0314 r0-4.0 T10 .596 .750 10.0 • • .0020-.0051
• For shanks, see pages 83-90 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide, see pages 37,219-228
(1) Number of flutes
(2) Specially tailored radius range, available upon request.
Rd°
MM ECU THSZMS
Interchangeable 3 Flute FHA
Undersized Solid Carbide Heads DCh8 DCONMS
for Keyways (DIN 6885)
RE APMX
LF
Recommended
Dimensions
Machining Data
fz
Designation DC NOF (1) APMX RE THSZMS DCONMS LF FHA IC908 (inch/t)
MM ECU077E04R020-3T05 .303 3 .157 .0079 T05 .303 .394 38.0 • .0012-.0031
MM ECU097E05R030-3T06 .382 3 .197 .0118 T06 .378 .512 38.0 • .0012-.0035
MM ECU117E07R030-3T08 .461 3 .276 .0118 T08 .453 .650 38.0 • .0012-.0039
MM ECU157E08R030-3T10 .618 3 .315 .0118 T10 .602 .807 38.0 • .0016-.0047
MM ECU197E12R040-3T12 .776 3 .472 .0157 T12 .726 1.004 38.0 • .0020-.0051
• For shanks, see pages 83-90 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide, see pages 37,219-228
(1) Number of flutes
69