Page 75 - MILLING_CATALOG_INCH_2022_P1-P92
P. 75
Rd°
MM EC-8/10 THSZMS
Interchangeable 8, 10 Flute
Solid Carbide Endmill Heads DCe8 DCONMS
with 30° and 45° Helix and
Various Corner Radii RE APMX FHA
LF
Dimensions Recommended
Machining Data
IC908 fz
Designation DC NOF (1) APMX RE THSZMS DCONMS LF FHA RMPX° (2) (inch/t)
MM EC.625A47R000-8T10 .625 8 .470 .0000 T10 .600 .810 30.0 5.0 • .0020-.0050
MM EC.625A47R015-8T10 .625 8 .470 .0150 T10 .600 .810 30.0 5.0 • .0020-.0050
MM EC.625A47R030-8T10 .625 8 .470 .0300 T10 .600 .810 30.0 5.0 • .0020-.0050
MM EC.625A47R060-8T10 .625 8 .470 .0600 T10 .600 .810 30.0 5.0 • .0020-.0050
MM EC.625B47R031-8T10 .625 8 .470 .0310 T10 .600 .810 45.0 5.0 • .0020-.0050 ENDMILLS • SOLID CARBIDE • MULTI-MASTER
MM EC.625B47R062-8T10 .625 8 .470 .0620 T10 .600 .810 45.0 5.0 • .0020-.0050
MM EC.750A62R032-10T12 .750 10 .620 .0320 T12 .726 1.000 30.0 3.0 • .0020-.0050
MM EC.750A62R064-10T12 .750 10 .620 .0640 T12 .726 1.000 30.0 3.0 • .0020-.0050
MM EC.750B62R031-10T12 .750 10 .620 .0310 T12 .726 1.000 45.0 3.0 • .0020-.0050
MM EC.750B62R062-10T12 .750 10 .620 .0620 T12 .726 1.000 45.0 3.0 • .0020-.0050
MM EC1.0A86R031-10T15 1.000 10 .860 .0310 T15 .940 1.456 30.0 3.0 • .0020-.0050
• For shanks, see pages 83-90 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide, see pages 37,219-228
(1) Number of flutes
(2) Maximum ramping angle
RE THSZMS Rd°
MM EC-CF-Z7/9-1.5xD APMX
Interchangeable 7, 9 Flute
Solid Carbide Endmill Heads DCe8 DCONMS
with 36° Helix and 1.5xD
Flute Lengths
LF FHA
Recommended
Dimensions
Machining Data
IC908 fz
Designation DC APMX RE NOF (1) THSZMS DCONMS LF FHA RMPX° (2) (inch/t)
MM EC312H47R015-7T05 .312 .4690 .0150 7 T05 .303 .709 36.0 3.0 • .0011-.0039
MM EC375H56R015-7T06 .375 .5630 .0150 7 T06 .366 .866 36.0 3.0 • .0015-.0039
MM EC500H75R015-7T08 .500 .7500 .0150 7 T08 .488 1.063 36.0 3.0 • .0015-.0039
MM EC625H94R031-9T10 .625 .9380 .0310 9 T10 .602 1.319 36.0 1.0 • .0019-.0039
MM EC750H112R031-9T12 .750 1.1250 .0310 9 T12 .726 1.614 36.0 1.0 • .0019-.0039
MM EC1.0H150R031-9T15 1.000 1.5000 .0310 9 T15 .941 2.067 36.0 1.0 • .0019-.0039
• For shanks, see pages 83-90 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection • For user guide, see pages 37,219-228
(1) Number of flutes
(2) Maximum ramping angle
73