Page 67 - MILLING_CATALOG_INCH_2022_P1-P92

THSZMS Rd°
MM ETR 7˚
Torodial 6 Flute Interchangeable DCXe8 DCONMS
Solid Carbide Milling Heads

RE
APMX FHA
LF

Dimensions Tough 1 Hard

IC908 IC903
Designation DCX (1) NOF (2) APMX RE THSZMS DCONMS LF FHA RMPX° (3)
MM ETR.312A16R078-6T05 90 .312 6 .160 .0780 T05 .300 .390 30.0 9.0 •
MM ETR080A4R05CF-6T05 .315 6 .157 .0197 T05 .303 .394 30.0 9.0 •
MM ETR080A4R10CF-6T05 .315 6 .157 .0394 T05 .303 .394 30.0 9.0 •
MM ETR.375A19R031-6T06 90 .375 6 .190 .0310 T06 .360 .510 30.0 9.0 •
MM ETR.375A19R125-6T06 90 .375 6 .190 .1250 T06 .360 .510 30.0 9.0 • ENDMILLS • SOLID CARBIDE • MULTI-MASTER
MM ETR100A5R05CF-6T06 .394 6 .197 .0197 T06 .378 .512 30.0 9.0 •
MM ETR100A5R10CF-6T06 .394 6 .197 .0394 T06 .378 .512 30.0 9.0 •
MM ETR120A7R05CF-6T08 .472 6 .276 .0197 T08 .472 .669 30.0 9.0 •
MM ETR120A7R10CF-6T08 .472 6 .276 .0394 T08 .472 .669 30.0 9.0 •
MM ETR.500A27R062-6T08 90 .500 6 .270 .0620 T08 .480 .650 30.0 9.0 •
MM ETR.500A27R125-6T08 90 .500 6 .270 .1250 T08 .480 .650 30.0 9.0 •
MM ETR.500A27R156-6T08 90 .500 6 .270 .1560 T08 .480 .650 30.0 9.0 •
MM ETR.625A35R200-6T10 90 .625 6 .350 .2000 T10 .600 .807 30.0 9.0 •
• For shanks, see pages 83-90 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide, see pages 37,219-228
(1) Cutting diameter maximum
(2) Number of flutes
(3) Maximum ramping angle

LF Rd°

MM ET RE 82° THSZMS
Solid Carbide Tapered Heads
with 20/30° Helix, Variable DC DCONMS
Pitch and Coolant Holes
for CHATTERFREE
Finishing Operations APMX
Recommended
Dimensions
Machining Data

IC908 fz
Designation DC RE NOF (1) APMX THSZMS DCONMS LF RMPX° (2) (inch/t)
MM ET11/8H4R10CF-8T08H .433 .0394 8 .138 T08 .472 .650 3.0 • .0016-.0039
MM ET15/8H4R10CF-12T10H .591 .0394 12 .138 T10 .630 .807 3.0 • .0020-.0043
• For shanks, see pages 83-90 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide, see pages 37,219-228
(1) Number of flutes
(2) Maximum ramping angle

65