Page 77 - MILLING_CATALOG_INCH_2022_P1-P92
P. 77
LF
RE APMX THSZMS Rd°
MM ECK-CF a2° a3°
Five and Six-Flute Heads
with 35°/38° Helix Featuring DC e8 DCONMS a1° a4°
Different Corner Radii For
Machining Titanium Alloys a6° a5°
a1≠a2≠a3≠a4≠a5≠a6
Dimensions Recommended
Machining Data
IC908 fz
Designation DC RE NOF (1) APMX THSZMS DCONMS LF RMPX° (2) (inch/t)
MM ECK.312H20R015-6T05CF .312 .0150 6 .2000 T05 .303 .394 5.0 • .0016-.0031
MM ECK.375H27R020-6T06CF .375 .0200 6 .2700 T06 .366 .512 5.0 • .0016-.0031
MM ECK.500H37R020-6T08CF .500 .0200 6 .3700 T08 .488 .650 5.0 • .0016-.0031
MM ECK.625H47R030-6T10CF .625 .0300 6 .4700 T10 .602 .807 5.0 • .0028-.0047
MM ECK.750H62R040-6T12CF .750 .0400 6 .6200 T12 .726 1.004 5.0 • .0028-.0047 ENDMILLS • SOLID CARBIDE • MULTI-MASTER
MM ECK1.00H86R040-6T15CF 1.000 .0400 6 .8600 T15 .941 1.457 5.0 • .0028-.0047
MM ECK125H1.5R060-5T21 1.250 .0600 5 1.5000 T21 1.181 2.165 1.5 • .0020-.0070
MM ECK125H1.5R120-5T21 1.250 .1200 5 1.5000 T21 1.181 2.165 1.3 • .0020-.0070
MM ECK125H1.5R250-5T21 1.250 .2500 5 1.5000 T21 1.181 2.165 .7 • .0020-.0070
MM ECK125H1.5R375-5T21 1.250 .3750 5 1.5000 T21 1.181 2.165 .5 • .0020-.0070
• For shanks, see pages 83-90 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide, see pages 37,219-228
(1) Number of flutes
(2) Maximum ramping angle
CHWx45°
MM EC-H-4-CF THSZMS a1° a2°
Interchangeable Carbide Endmill
Heads for CHATTERFREE DC DCONMS
Milling Alloyed Steel a4° a3°
APMX FHA (46-48°)
LF
a1≠a2≠a3≠a4
Recommended
Dimensions
Machining Data
IC908 fz
Designation DC NOF (1) APMX THSZMS DCONMS LF CHW KCH (inch/t)
MM EC.312H20C12-4T05CF .312 4 .210 T05 .303 .393 .012 45.00 • .0010-.0030
MM EC.375H27C16-4T06CF .375 4 .291 T06 .364 .510 .016 45.00 • .0010-.0040
MM EC.500H37C20-4T08CF .500 4 .366 T08 .488 .650 .020 45.00 • .0016-.0040
MM EC.625H47C24-4T10CF .625 4 .488 T10 .600 .810 .024 45.00 • .0020-.0040
MM EC.750H62C24-4T12CF .750 4 .630 T12 .726 1.004 .024 45.00 • .0020-.0040
• For shanks, see pages 83-90 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide, see pages 37,219-228
(1) Number of flutes
75