Page 78 - MILLING_CATALOG_INCH_2022_P1-P92

RE THSZMS Rd°
ENDMILLS • SOLID CARBIDE • MULTI-MASTER

APMX
MM EC-Z4-1.5xD DCe8 DCONMS
Interchangeable Solid Carbide
Endmill Heads with 1.5xD Flute
Lengths for CHATTERFREE LF FHA
Roughing and Finishing
Dimensions Recommended
Machining Data

IC908 fz
Designation DC NOF (1) APMX RE THSZMS DCONMS LF FHA (inch/t)
MM EC312H47R015CF-4T05 .312 4 .4690 .0150 T05 .303 .709 46.5 • .0011-.0035
MM EC375H56R015CF-4T06 .375 4 .5630 .0150 T06 .366 .866 46.5 • .0011-.0039
MM EC500H75R015CF-4T08 .500 4 .7500 .0150 T08 .488 1.063 46.5 • .0015-.0043
MM EC625H94R015CF-4T10 .625 4 .9380 .0150 T10 .602 1.319 46.5 • .0019-.0051
MM EC750H112R031CF-4T12 .750 4 1.1250 .0310 T12 .726 1.614 46.5 • .0019-.0066
MM EC1.0H150R031CF-4T15 1.000 4 1.5000 .0310 T15 .941 2.067 46.5 • .0023-.0066
• For shanks, see pages 83-90 • Do not apply lubricant to the threaded connection • For user guide, see pages 37,219-228
(1) Number of flutes

Rd°
MM EC-H-5-CF THSZMS a2°
Interchangeable Carbide Endmill a1° a3°
Heads for CHATTERFREE Milling DCe8 DCONMS
of High Temperature Alloys a5°
such as titanium and Inconel CHWx45° FHA (35 - 41°) a4°
APMX
LF a1≠a2≠a3≠a4≠a5
Recommended
Dimensions Tough 1 Hard
Machining Data

IC308 IC908 fz
Designation DC NOF (1) APMX THSZMS DCONMS LF RMPX° (2) CHW KCH (inch/t)
MM EC.312H20C12-5T05CF .312 5 .210 T05 .312 .393 5.0 .012 45.00 • • .0010-.0030
MM EC080H05C3-5T05CF .315 5 .197 T05 .303 .394 5.0 .012 45.00 • .0012-.0035
MM EC.375H27C16-5T06CF .375 5 .287 T06 .364 .510 5.0 .016 45.00 • • .0010-.0040
MM EC100H07C4-5T06CF .394 5 .276 T06 .378 .512 5.0 .016 45.00 • .0012-.0039
MM EC120H09C5-5T08CF .472 5 .354 T08 .461 .650 4.0 .020 45.00 • .0016-.0043
MM EC.500H37C20-5T08CF .500 5 .374 T08 .488 .650 4.0 .020 45.00 • • .0016-.0040
MM EC.625H47C24-5T10CF .625 5 .492 T10 .600 .810 4.0 .024 45.00 • • .0020-.0040
MM EC160H12C6-5T10CF .630 5 .472 T10 .602 .807 4.0 .024 45.00 • .0020-.0051
MM EC.750H62C24-5T12CF .750 5 .630 T12 .726 1.004 3.0 .024 45.00 • • .0020-.0040
MM EC200H15C6-5T12CF .787 5 .591 T12 .726 1.004 3.0 .024 45.00 • .0020-.0067
MM EC250H22C6-5T15CF .984 5 .866 T15 .941 1.457 3.0 .024 45.00 • .0024-.0067
MM EC1.00H86C24-5T15CF 1.000 5 .894 T15 .940 1.457 3.0 .024 45.00 • • .0024-.0043
• For shanks, see pages 83-90 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide, see pages 37,219-228
(1) Number of flutes
(2) Maximum ramping angle

76 ISCAR