Page 79 - MILLING_CATALOG_INCH_2022_P1-P92

CHWx45° THSZMS Rd°

MM EFS DCe9 DCONMS
Combination of Interchangeable
Solid Carbide Endmill Heads
for Roughing and Finishing APMX FHA
LF
Dimensions Recommended
Machining Data

IC908 fz
Designation DC NOF (1) APMX THSZMS DCONMS LF FHA CHW KCH (inch/t)
MM EFS.312B20-4T05 .312 4 .200 T05 .300 .393 45.0 .012 45.00 • .0010-.0030
MM EFS.375B27-4T06 .375 4 .275 T06 .360 .512 45.0 .012 45.00 • .0010-.0040
MM EFS.500B37-4T08 .500 4 .370 T08 .488 .650 45.0 .015 45.00 • .0016-.0000
MM EFS.625B47-4T10 .625 4 .470 T10 .600 .800 45.0 .024 45.00 • .0020-.0040
MM EFS.750B62-4T12 .750 4 .620 T12 .726 1.004 45.0 .024 45.00 • .0020-.0040 ENDMILLS • SOLID CARBIDE • MULTI-MASTER
MM EFS200B15-4T12 .787 4 .591 T12 .726 1.004 45.0 .024 45.00 • .0020-.0043
MM EFS1.00B86-4T15 1.000 4 .866 T15 .941 1.457 45.0 .024 45.00 • .0000-.0000
• For shanks, see pages 83-90 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide, see pages 37,219-228
(1) Number of flutes

CHWx45° DCONMS Rd°
THSZMS α1 α2
MM EFS-CF DCe9
4 Flute Solid Carbide Heads FHA
with 38° Helix and Variable Pitch APMX α2 α1
LF
for CHATTERFREE Roughing
and Finishing Applications
Recommended
Dimensions
Machining Data

IC908 fz
Designation DC NOF (1) APMX CHW KCH THSZMS DCONMS LF FHA (inch/t)
MM EFS.250E20-4T05 CF .250 4 .210 .010 45.00 T05 .312 .393 38.0 • .0010-.0030
MM EFS.312E20-4T05 CF .312 4 .210 .012 45.00 T05 .312 .393 38.0 • .0010-.0030
MM EFS.375E27-4T06 CF .375 4 .287 .016 45.00 T06 .364 .510 38.0 • .0010-.0040
MM EFS.500E37-4T08 CF .500 4 .374 .020 45.00 T08 .488 .650 38.0 • .0016-.0039
MM EFS.625E47-4T10 CF .625 4 .492 .024 45.00 T10 .600 .810 38.0 • .0020-.0040
MM EFS.750E62-4T12 CF .750 4 .630 .024 45.00 T12 .726 1.004 38.0 • .0020-.0040
MM EFS200E15-4T12 CF .787 4 .630 .024 45.00 T12 .726 1.004 38.0 • .0020-.0043
MM EFS1.00E86-4T15 CF 1.000 4 .894 .024 45.00 T15 .940 1.457 38.0 • .0024-.0043
• For shanks, see pages 83-90 • For clamping keys (to be ordered separately), tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection. • For user guide, see pages 37,219-228
(1) Number of flutes

77