Page 45 - MILLING_CATALOG_INCH_2022_P361-P592
P. 45
SW/S DCONWS LF
Drive Shanks for SELF-GRIP Screw BD DBC DCONMS BD
Slitting Cutters DBC DCONWS DCONMS
LPR
LF
SW- Type S- Type
Designation DCONMS BD DCONWS DBC LPR LF Lbs
SW 1.00-23 1.000 .906 .236 .535 .984 4.330 .00
SW 1.00-28 1.000 1.100 .315 .709 1.000 4.330 .99
SW 1.00-32 1.000 1.260 .394 .866 1.000 4.330 1.05
SW 1.25-46 1.250 1.810 1.000 1.420 1.180 4.720 4.43
S 1.25-55 1.250 2.160 1.250 1.770 - 2.360 1.84 SLOTTING & SLITTING CUTTERS
S 1.50-80 1.500 3.150 1.500 2.480 - 2.360 1.10
For tools, see pages: GM-DG (408) • SGSA (406) • SGSF (404) • TGSF (398)
Spare Parts
Designation
SW 1.00-23 SR 34-510 T-15/5
SW 1.00-28 SR 76-961 T-15/5
SW 1.00-32 SR 76-961 T-15/5
SW 1.25-46 SR 76-963 T-15/5
S 1.25-55 SR 76-943 BLD T20/M7 SW6-T
S 1.50-80 SR 76-944 HW 6.0
R (drive flange set) DCONMS LB D4
Drive Flange Set for
Slitting Cutters BD DBC
Designation DCONMS BD DBC D4 LB
R 1.00-46 1.000 1.810 1.420 .190 .390
R 1.25-55 1.250 2.160 1.770 .230 .390
R 1.50-80 1.500 3.150 2.480 .430 .470
OAL CW
SGSF/A-M-JHP LF
Grooving and Slitting Small THSZMS CDX
Diameter Cutters with FLEXFIT DC
Threaded Adaptation DCONMS PSI
DRVS
Designation DC CW CDX CICT (1) DCONMS THSZMS LF OAL DRVS (2) Insert TQ_3 (3)
SGSF 32-2-M08-3Z-JHP 1.260 .079 .307 3 .512 M08 .472 1.161 .378 GSFN 2... 180 ESG 1.4-2*
SGSA 32-3-M08-4Z-JHP 1.260 .118 .307 4 .512 M08 .507 1.196 .378 GSAN 3... 180 ESG 1.4-2*
SGSF 40-2-M10-4Z-JHP 1.575 .079 .465 4 .709 M10 .472 1.161 .591 GSFN 2... 260 ESG 1.4-2*
SGSA 40-3-M10-6Z-JHP 1.575 .118 .465 6 .709 M10 .476 1.264 .591 GSAN 3... 260 ESG 1.4-2*
• For best performance use internal coolant with "CH" type shanks • When mounting items with FLEXFIT threaded adaptation, the mating surfaces and threaded areas must
be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the TQ_3 parameter
(1) Number of inserts
(2) Torque key size
(3) Tool tightening torque Nxm (lbfxin)
* Optional, to be ordered separately
For inserts, see pages: GSAN (406) • GSFN (407) • GSFU (407)
For holders, see pages: BT-ODP (FLEXFIT) (356) • C#-ODP (FLEXFIT) (356) • CAB M-M (FLEXFIT) (354) • CAT-ODP (FLEXFIT) (360)
• DIN69871-ODP (Metric) (357) • ER-ODP (358) • HSK A-ODP (FLEXFIT) (359) • S M (354)
405