Page 46 - MILLING_CATALOG_INCH_2022_P361-P592
P. 46
OAL
SLOTTING & SLITTING CUTTERS
LF CW
SGSF/A-MM-JHP THSZMS CDX DC
Grooving and Slitting Cutters DCONMS PSI
with MULTI-MASTER
Threaded Adaptation DRVS
Designation DC CW CDX CICT (1) DCONMS THSZMS LF OAL DRVS (2) Insert
SGSF 32-2-MMT08-3Z-JHP 1.260 .079 .354 3 .461 T08 .417 .713 .394 GSFN 2... ESG 1.4-2*
SGSA 32-3-MMT08-4Z-JHP 1.260 .118 .354 4 .461 T08 .457 .756 .394 GSAN 3... ESG 1.4-2*
SGSF 40-2-MMT10-4Z-JHP 1.575 .079 .445 4 .602 T10 .417 .862 .512 GSFN 2... ESG 1.4-2*
SGSA 40-3-MMT10-6Z-JHP 1.575 .118 .445 6 .602 T10 .449 .894 .512 GSAN 3... ESG 1.4-2*
• For best performance use internal coolant with "CH" type shanks
(1) Number of inserts
(2) Torque key size
* Optional, to be ordered separately
For inserts, see pages: GSAN (406) • GSFN (407) • GSFU (407)
For holders, see pages: MM CAB (733) • MM CAB-T-T (90) • MM GRT (shanks) (85) • MM S-A (stepped shanks) (83) • MM S-A (straight shanks) (86)
• MM S-A-C# (84) • MM S-A-HSK (672) • MM S-B (85° conical shanks) (86) • MM S-D (89° conical shanks) (87) • MM S-ER (88)
• MM S-ER-H (89) • MM TS-A (85)
CW CW
SGSA LB CDX DCONMS
Slitting Cutters Carrying GSAN D4 Screw
Self-Clamped Inserts DC DBS
DHUB OAL DC
THUB
THUB
Flange Drive R Shank Drive
Designation CWN (1) CWX (2) DC CICT (3) DHUB DCONMS OAL THUB CDX (4) RPMX (5) MIID (6)
SGSA 32-3 .106 .139 1.260 4 .717 .315 .157 .094 .217 2400 GSAN 3 ESG 1.4-2
SGSA 40-3-6K .106 .139 1.575 5 .827 .236 .126 .094 .315 2000 GSAN 3 ESG 1.4-2
SGSA 50-3-8K .106 .139 1.969 7 1.063 .315 .126 .094 .413 1600 GSAN 3 ESG 1.4-2
SGSA 80-3-1.00K-10Z-FP .106 .138 3.150 10 - 1.000 .100 .090 .630 995 GSAN 3 ESG 1.4-2
SGSA 100-3-1.00K-12Z-FP .106 .138 3.940 12 - 1.000 .100 .090 .780 795 GSAN 3 ESG 1.4-2
SGSA 125-3-1.25K-16Z-FP .106 .138 4.920 16 - 1.250 .100 .090 1.000 635 GSAN 3 ESG 1.4-2
SGSA 32-4 .139 .178 1.260 4 .717 .315 .157 .126 .217 2400 GSAN 4 ESG 1.4-2
SGSA 40-4-6K .139 .178 1.575 5 .827 .236 .126 .126 .315 2000 GSAN 4 ESG 1.4-2
SGSA 50-4-8K .139 .178 1.969 7 - .315 .126 .126 .413 1600 GSAN 4 ESG 1.4-2
SGSA 80-4-1.00K-10Z-FP .139 .178 3.150 10 - 1.000 .100 .130 .630 995 GSAN 4 ESG 1.4-2
SGSA 100-4-1.00K-12Z-FP .139 .178 3.940 12 - 1.000 .100 .130 .780 795 GSAN 4 ESG 1.4-2
• For LB,DBS,D4 refer to SW/S drive shanks and R drive flange set • Maximum RPM may not be exceeded • For user guide, see pages 410-416
(1) Minimum cutting width
(2) Maximum cutting width
(3) Number of inserts
(4) Cutting depth maximum
(5) Maximum RPM
(6) Master insert identification
For inserts, see pages: GSAN (406)
For holders, see pages: SW/S (405)
GSAN 12°
SELF-GRIP Slitting Inserts 7°
CW
RE
Dimensions Tough 1 Hard
IC328 IC908
Designation CW RE
GSAN 3 .118 .0080 • •
GSAN 4 .157 .0090 •
For tools, see pages: SGSA (406) • SGSF/A-M-JHP (405) • SGSF/A-MM-JHP (406)
406 ISCAR