Page 95 - MILLING_CATALOG_INCH_2022_P361-P592

BD
MTE D(Multi Insert)
Multi Insert Threading Endmills DC DCONMS
with Weldon Shanks
APMX
LU
OAL

Designation APMX DC DCONMS BD CICT (1) OAL LU CICT (2) Shank (3) TQ (4) Lbs
MTE D0.79-2-W0.75-14 .5510 .790 .750 .630 2 3.660 1.54 2 W 10.62 .51 SR M2.6-L6.7-S11 BLD T08/M7 SW4-SD
MTE D0.79-3-W0.75-14 .5510 .790 .750 .630 3 3.660 1.54 3 W 10.62 .33 SR M2.6-L6.7-S11 BLD T08/M7 SW4-SD THREAD MILLING TOOLS
MTE D1.18-2-W1.00-21 .8270 1.180 1.000 .950 2 4.250 1.97 2 W 42.48 .55 SR M4-IP15-MT BLD IP15/S7 SW6-SD
MTE D1.56-2-W1.25-30 1.1810 1.560 1.250 1.180 2 5.125 2.84 2 W 79.65 1.98 SR M5-IP25-MT BLD IP25/S7 SW6-T
MTE D2.00-2-W1.50-40 1.5750 2.000 1.500 1.480 2 6.000 3.35 2 W 79.65 1.76 SR M5-IP25-MT BLD IP25/S7 SW6-T
• Tool cutting diameter should not exceed 2/3 of thread bore diameter • For user guide, see pages 475-482
(1) Number of inserts
(2) W-Weldon
(3) Recommended clamping torque
(4) Recommended clamping torque
For inserts, see pages: MT LNH#-ACME (Internal) (466) • MT LNH#-ISO (Internal) (459) • MT LNH#-NPS (465) • MT LNH#-NPSF (465)
• MT LNH#-UN (Internal) (461) • MT LNH#-W (463) • MT LNHT-ABUT (466) • MT LNHT-BSPT (464) • MT LNHT-NPT (463) • MT LNHT-NPTF (464)
• MT LNHU-ISO (External) (460) • MT LNHU-PG (467) • MT LNHU-UN (External) (462)

DHUB

MTF D(Shell Mill) DCONMS
Thread Milling
Multi-Insert Shell Mills OAL
APMX
DC

Designation DC APMX CICT (2) DHUB DCONMS OAL TQ (3) Lbs
MTF D2.50-5-.75-21 2.500 .8270 5 1.693 .750 2.000 42.48 1.01
MTF D2.50-4-.75-30 2.500 1.1810 4 1.850 .750 2.000 79.65 1.43
MTF D3.94-8-1.25-30 (1) 3.940 1.1810 8 2.874 1.250 2.362 79.65 .33
MTF D4.00-4-1.25-30 4.000 1.1810 4 2.874 1.250 2.000 79.65 4.63
MTF D4.00-8-1.25-30 4.000 1.1810 8 2.874 1.250 2.000 79.65 4.20
MTF D3.15-4-1.00-40 3.150 1.5750 4 2.250 1.000 2.500 79.65 2.65
MTF D4.00-4-1.25-40 4.000 1.5750 4 2.874 1.250 2.500 79.65 4.20
• For user guide, see pages 475-482
(1) Related only to inserts:3358371 MT LNHT 3005 4BBUT IC908 • 5669496 MT LNHT 3005 4ABUT IC908
(2) Number of inserts
(3) Recommended clamping torque
For inserts, see pages: MT LNH#-ACME (Internal) (466) • MT LNH#-ISO (Internal) (459) • MT LNH#-NPS (465) • MT LNH#-NPSF (465)
• MT LNH#-UN (Internal) (461) • MT LNH#-W (463) • MT LNHT-ABUT (466) • MT LNHT-BSPT (464) • MT LNHT-NPT (463) • MT LNHT-NPTF (464)
• MT LNHU-ISO (External) (460) • MT LNHU-PG (467) • MT LNHU-UN (External) (462)

Spare Parts

Designation
MTF D2.50-5-.75-21 SR M4-IP15-MT BLD IP15/S7 SW6-SD SR UNF 3/8X1 B18.3
MTF D2.50-4-.75-30 SR M5-IP25-MT BLD IP25/S7 SW6-T SR UNF 3/8X1 B18.3
MTF D3.94-8-1.25-30 SR M5-IP25-MT BLD IP25/S7 SW6-T SR UNF 5/8X1 B18.3
MTF D4.00-4-1.25-30 SR M5-IP25-MT BLD IP25/S7 SW6-T SR UNF 5/8X1 B18.3
MTF D4.00-8-1.25-30 SR M5-IP25-MT BLD IP25/S7 SW6-T SR UNF 5/8X1 B18.3
MTF D3.15-4-1.00-40 SR M5-IP25-MT BLD IP25/S7 SW6-T SR UNF 1/2X20X1 B18.3
MTF D4.00-4-1.25-40 SR M5-IP25-MT BLD IP25/S7 SW6-T SR UNF 5/8X1 B18.3

455