Page 96 - MILLING_CATALOG_INCH_2022_P361-P592

DHUB DCONMS
THREAD MILLING TOOLS
MTFLE
External Multi-Tooth
Threading Shell Mills OAL
LUX APMX

DC
BD

Designation DC BD DHUB DCONMS OAL LUX APMX CICT (1) TQ (2) Lbs
MTFLE D0.75-3-0.75-21 .750 2.250 1.850 .750 2.500 1.11 .8270 3 42.48 1.50
MTFLE D0.75-4-0.75-21 .750 2.250 1.850 .750 2.500 1.11 .8270 4 42.48 1.50
MTFLE D1.19-3-0.75-21 1.190 2.690 2.080 .750 2.500 1.11 .8270 3 42.48 2.00
MTFLE D1.75-4-1.0-21 1.750 3.260 2.320 1.000 2.750 1.18 .8270 4 42.48 3.00
(1) Number of inserts
(2) Recommended clamping torque
For inserts, see pages: MT LNH#-NPS (465) • MT LNH#-NPSF (465) • MT LNH#-W (463) • MT LNHT-ABUT (466) • MT LNHT-BSPT (464)
• MT LNHT-NPT (463) • MT LNHT-NPTF (464) • MT LNHU-ISO (External) (460) • MT LNHU-PG (467) • MT LNHU-UN (External) (462)

Spare Parts

Designation
MTFLE D0.75-3-0.75-21 SR M4-IP15-MT BLD IP15/S7 SW6-SD SR UNF 3/8X1 B18.3
MTFLE D0.75-4-0.75-21 SR M4-IP15-MT BLD IP15/S7 SW6-SD SR UNF 3/8X1 B18.3
MTFLE D1.19-3-0.75-21 SR M4-IP15-MT BLD IP15/S7 SW6-SD SR UNF 3/8X1 B18.3
MTFLE D1.75-4-1.0-21 SR M4-IP15-MT BLD IP15/S7 SW6-SD SR UNF 1/2X20X1 B18.3

MTSRH (endmills)
Endmills with Coolant Holes DC DCONMS
for Helical Threading Inserts
APMX
LU
OAL

Designation DC APMX DCONMS OAL LU NOF (1) Shank (2) Lbs Insert
MTSRH 091H23-2 .910 1.0630 1.000 4.500 2.00 2 W .80 MTH 23 S23 K21
MTSRH 091H23-2-N .910 1.0630 1.000 4.500 2.00 2 W .00 MTH 23 S23 T-20/5
MTSRH 126H32-5 1.260 1.2600 1.250 5.000 2.36 5 W 1.47 MTH 32 S32
MTSRH 126H32-5-N 1.260 1.2600 1.250 5.000 2.36 5 W 1.26 MTH 32 S32 T-20/5
MTSRH 177H45-6 1.770 1.4570 1.250 5.000 - 6 W 1.87 MTH 45 S45X K40
MTSRH 177H45-6-N 1.770 1.4570 1.250 5.000 - 6 W .00 MTH 45 K40
• Note: ISCAR can provide special contour inserts on request • For user guide, see pages 475-482
(1) Number of flutes
(2) W-Weldon
For inserts, see pages: MTH-BSPT (int. & ext.) (471) • MTH-F (473) • MTH-ISO (external) (467) • MTH-ISO (internal) (468)
• MTH-NPT (int. & ext.) (472) • MTH-NPTF (int. & ext.) (472) • MTH-UN (external) (469) • MTH-UN (internal) (470) • MTH-W (int. & ext.) (471)

MTH-F

MTH

MTSRH with MTH-F
Finishing Inserts

456 ISCAR