Page 97 - MILLING_CATALOG_INCH_2022_P361-P592

DHUB
MTSRH (helical shell mill) DCONMS
Shell Mills with Coolant Holes
for Helical Threading Inserts OAL
APMX

DC

Designation DC APMX DHUB DCONMS OAL NOF (1) Lbs Insert
MTSRH 248H63-9 2.480 1.4960 2.030 .750 2.000 9 .99 MTH 63 S63 K40
MTSRH 248H63-9-N 2.480 1.4960 2.030 .750 2.000 9 .00 MTH 63 K40 THREAD MILLING TOOLS
• Note: ISCAR can provide special contour inserts on request • For user guide, see pages 475-482
(1) Number of flutes
For inserts, see pages: MTH-BSPT (int. & ext.) (471) • MTH-F (473) • MTH-ISO (internal) (468) • MTH-NPT (int. & ext.) (472)
• MTH-UN (internal) (470) • MTH-W (int. & ext.) (471)

MTH-F

MTH

MTET Single Point OAL
Indexable Threading Endmills
with Cylindrical Shanks DC DCONMS
for Single Point Inserts

Recommended
Dimensions
Machining Data

fz
Designation TPN (mm) (2) TPX (mm) (3) TPIX (4) TPIN (5) DC DCONMS OAL Shank (6) Shank m. (7) Insert CSP (8) Lbs (IPR)
MTET D.35-1-C.25C-08 .500 1.750 48.00 14.00 .350 .250 4.130 C C 08IR/EL 1 .13 .0020-.0060
MTET D.50-1-C.38C-11 (1) .500 2.000 48.00 11.00 .500 .375 6.000 C C 11IR/EL 1 .33 .0020-.0060
• For user guide, see pages 475-482 • For inserts, refer to ISCAR Turning Lines catalog • Tool cutting diameter should not exceed 2/3 of thread bore diameter
(1) For internal threading use internal R.H insert, for external threading use external L.H insert
(2) Thread pitch minimum (mm)
(3) Thread pitch maximum (mm)
(4) Threads per inch maximum
(5) Threads per inch minimum
(6) C-Cylindrical
(7) Shank material C-carbide
(8) 0 - Without coolant supply, 1 - With coolant supply

Spare Parts

Designation
MTET D.35-1-C.25C-08 SR 14-558-S T-6/5
MTET D.50-1-C.38C-11 SR M2.6-L6.7-S11 T-8/5

457