Page 37 - Turning_catalog_INCH_2022_45_P261-508

±.004
GIMT 7º
Utility Single-Ended Inserts .602 Ref
for Grooving and Turning .197
CW BW
RE
GROOVE-TURN
Dimensions Tough 1 Hard Recommended Machining Data

IC830 IC8250 IC808 IC07 IC806 ap f turn f groove
Designation CW RE CWTOL (1) RETOL (2) BW (inch) (IPR) (IPR)
GIMT 302 .118 .008 .0020 .0020 .094 • • • • • .020-.071 .0039-.0087 .0027-.0059
GIMT 304 .118 .016 .0020 .0020 .094 • • • • • .020-.071 .0039-.0087 .0027-.0059
GIMT 402 .157 .008 .0020 .0020 .134 • • • • • .020-.094 .0059-.0098 .0035-.0079
GIMT 404 .157 .016 .0020 .0020 .134 • • • • • .020-.094 .0059-.0098 .0035-.0079
GIMT 508 .197 .031 .0020 .0020 .157 • • • • • .039-.118 .0079-.0138 .0043-.0087
GIMT 608 .236 .031 .0020 .0020 .197 • • • • • .039-.142 .0087-.0157 .0051-.0098
• DMIN for internal applications = 276" • For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: Anti-Vibration Blades (293) • C#-GHDR/L (284) • CGHN 26-M (380) • CGHN 32-DGM (382) • CGHN 32-M (381)
• CGHN-D (291) • CGHN-DG (292) • CGHN-S (291) • CGPAD (290) • CGPAD-JHP (290) • GHDR/L (short pocket) (285) • GHDR/L-JHP (short pocket) (286)
• GHGR/L (287) • GHMPR/L (283) • GHMR/L (283)

±.004
GIMF 7º
Utility Single-Ended Inserts .602 Ref.
for Grooving and Turning .197
CW BW
RE

Dimensions Tough 1 Hard Recommended Machining Data

IC830 IC8250 IC808 IC908 IC5010 IC428 IC806 IC907 IC804 ap f turn f groove
Designation CW RE CWTOL (1) RETOL (2) BW IC20 IC4 (inch) (IPR) (IPR)
GIMF 406 .157 .024 .0020 .0020 .134 • • • • • • • • • • • .030-.094 .0075-.0098 .0035-.0063
GIMF 502 .197 .008 .0020 .0020 .157 • • .010-.118 .0071-.0102 .0043-.0071
GIMF 508 .197 .031 .0020 .0020 .157 • • • • • • • • • • .039-.118 .0091-.0138 .0043-.0083
GIMF 605 .236 .020 .0020 .0020 .197 • • .024-.142 .0087-.0142 .0051-.0091
GIMF 608 .236 .031 .0020 .0020 .197 • • • • • • • • • .039-.142 .0094-.0165 .0051-.0098
GIMF 808 .315 .031 .0020 .0020 .236 • • • .039-.189 .0126-.0220 .0071-.0134
• DMIN for internal applications = 276" • For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: Anti-Vibration Blades (293) • C#-GHDR/L (284) • CGFG 51-P8 (634) • CGHN 26-M (380) • CGHN 32-DGM (382)
• CGHN 32-M (381) • CGHN-D (291) • CGHN-DG (292) • CGHN-P8 (292) • CGHN-S (291) • CGHR/L-P8DG (292) • CGPAD (290) • CGPAD-JHP (290)
• GHDR/L (short pocket) (285) • GHDR/L-JHP (short pocket) (286) • GHGR/L (287) • GHMPR/L (283) • GHMR/L (283)

297