Page 32 - Turning_catalog_INCH_2022_45_P261-508
P. 32
GROOVE-TURN CGHN-DG 1.260 CWN CUTDIA=2xOHX (2) OHX OAL OHX_2 (4) WB CWN-CWX 5.906 .094 EDG 44A*
Double-Ended Blades for
H
External Grooving and Turning
HF
Self-Clamped Inserts
(1)
(3)
WB
Designation
H
CWX
OAL
HF
OHX
CGHN 32-3DG
.110
.98
.976
.157
1.968
CGHN 32-4DG
.126
1.18
5.906
.976
1.968
1.260
.138
EDG 44A*
.197
CGHN 32-5DG
.173
2.362
.976
1.260
.252
.157
1.30
EDG 44A*
5.906
.252
2.362
.217
1.38
1.260
CGHN 32-6DG
.976
5.906
.205
EDG 44A*
• DO-GRIP clamping insert is self-retained for long overhang • When using TIP inserts, toolholder seat needs to be modified according to insert profile to ensure clearance
• When using a double-ended insert, grooving depth is limited by the insert • For user guide, see pages 471-488
(1) Minimum cutting width
(2)
Maximum cutting width
(3) Maximum overhang for grooving
(4) Maximum overhang for turning
* Optional, should be ordered separately
For inserts, see pages: GIA-K (W=118-236) (309) • GIF (308) • GIF (full radius) (309) • GIF-E (W=157-236 radius) (304)
• GIF-E (W=157-236) (302) • GIM-C (577) • GIM-J (577) • GIM-J-RA/LA (578) • GIM-UT (579) • GIM-UT-RA/LA (580) • GIM-W (578)
• GIM-W-RA/LA (579) • GIMF (297) • GIMN (299) • GIMT (297) • GIMY (298) • GIMY (full radius) (300) • GIMY-F (301) • GIP (307)
• GIP (full radius) (307) • GIP-E (303) • GIP-E (full radius) (304) • GIP-UN (315) • GIPA (round W=118-236) (313) • GIPA (W=118-236) (312)
• GIPM-A46 / GIP-1250 (400) • GIPY (311) • GITM (310) • GITM (full radius) (311) • TIP-MT (706) • TIP-P-BSPT (736) • TIP-P-BSW (729)
• TIP-P-ISO (717) • TIP-P-NPT (732) • TIP-P-UN (724) • TIP-WT (698)
For holders, see pages: C#-TBK-R/L (677) • HSK A-WH-TBK-R/L (688) • SGTBU/SGTBN (672) • UBHCR/L (673)
OHX
CGHN-P8
Blades for Deep Grooving H HF
and Turning
CW OAL WB
150˚
Designation CW OHX (3) CDX (4) WB HF H OAL
CGHN 52-P8 (1) .315 1.968 1.693 .291 1.772 2.071 7.480 SR 76-1637 HW 4.0
CGHN 53-P8 (2) .315 2.756 2.480 .291 1.772 2.071 10.236 SR 76-1637 HW 4.0
• For user guide, see pages 471-488
(1) If CUTDIA (workpiece) is smaller than 787", then CDX=189; if CUTDIA (workpiece) is larger than 787", then CDX=169"
(2) If CUTDIA (workpiece) is smaller than 787", then CDX=167"; if CUTDIA(workpiece) is larger than 787", then CDX=248"
(3) Maximum overhang
(4) Cutting depth maximum
For inserts, see pages: GIMF (297) • GIMM 8CC (637) • GIMY (298) • GIMY (full radius) (300) • GIMY-F (301) • GIPY (311)
For holders, see pages: SGTBK (673) • SGTBU/SGTBN (672)
CGHR/L-P8DG OHX CW
Double-Ended Heavy Duty H
Self-Clamped Grooving HF
and Turning Blades
WB
OAL
CGHR CGHL
Designation CW OHX (1) WB HF H OAL
CGHR/L 32-P8DG .315 1.575 .268 .976 1.260 5.906 EDG 44A*
• For user guide, see pages 471-488
(1) Minimum overhang • If CUTDIA (workpiece) is smaller than 787", then CDX=189; if CUTDIA (workpiece) is larger than 787", then CDX=169
* Optional, should be ordered separately
For inserts, see pages: GIMF (297) • GIMM 8CC (637) • GIMY (298) • GIMY (full radius) (300) • GIMY-F (301) • GIPY (311)
For holders, see pages: C#-TBK-R/L (677) • HSK A-WH-TBK-R/L (688) • SGTBK (673) • SGTBU/SGTBN (672)
292 ISCAR