Page 39 - Turning_catalog_INCH_2022_45_P261-508

±.004
GIMN 7°
Utility Single-Ended Inserts
for Grooving and Turning .602 Ref.
Ductile Materials CW
RE BW
GROOVE-TURN
Dimensions Tough 1 Hard Recommended Machining Data

IC908 IC907 ap f turn f groove
Designation CW RE CWTOL (1) RETOL (2) BW (inch) (IPR) (IPR)
GIMN 302 .118 .008 .0020 .0020 .094 • .012-.047 .0027-.0043 .0016-.0035
GIMN 406 .157 .024 .0020 .0020 .134 • .030-.063 .0043-.0071 .0020-.0055
GIMN 508 .197 .031 .0020 .0020 .161 • • .039-.079 .0059-.0098 .0024-.0071
GIMN 608 .236 .031 .0020 .0020 .197 • .039-.094 .0071-.0118 .0027-.0087
• DMIN for internal applications = 276" • For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: Anti-Vibration Blades (293) • C#-GHDR/L (284) • CGHN 26-M (380) • CGHN 32-DGM (382) • CGHN 32-M (381)
• CGHN-D (291) • CGHN-DG (292) • CGHN-S (291) • CGPAD (290) • CGPAD-JHP (290) • GHDR/L (short pocket) (285) • GHDR/L-JHP (short pocket) (286)
• GHGR/L (287) • GHMPR/L (283) • GHMR/L (283)

GDMN ±.004 1. 18 Ref.
Utility Double-Ended Inserts 7°
for Grooving and Turning BW .252
Ductile Materials
CW
RE

Dimensions Tough 1 Hard Recommended Machining Data

IC830 IC8250 IC808 IC907 ap f turn f groove
Designation CW RE CWTOL (1) RETOL (2) CDX (3) BW (inch) (IPR) (IPR)
GDMN 808 .315 .031 .0020 .0020 1.063 .236 • • • • .039-.126 .0079-.0138 .0039-.0118
• DMIN for internal machining = 256" • For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
For tools, see pages: C#-GHDR/L (284) • CGHN-8-10D (296) • GADR/L-8 (295) • GADR/L-JHP (296) • GAFG-R/L-8 (633) • GHDR/L (long pocket) (294)
• GHDR/L-JHP (long pocket) (294) • GHFG-R/L-8 (632) • GHFGR/L-8 (632) • GHIR/L (W=260-315) (379)

GDMU ±.004 1.18 Ref.
Utility Inserts for Heavy 7° .252
Grooving on Ductile Materials RE
CW
BW
Recommended
Dimensions Tough 1 Hard Machining Data

IC830 IC8250 f groove
Designation CW RE CWTOL (1) RETOL (2) BW (IPR)
GDMU 808 .315 .031 .0020 .0020 .236 • • .0039-.0094
• For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: C#-GHDR/L (284) • CGHN-8-10D (296) • GADR/L-8 (295) • GADR/L-JHP (296) • GAFG-R/L-8 (633) • GHDR/L (long pocket) (294)
• GHDR/L-JHP (long pocket) (294) • GHFG-R/L-8 (632) • GHFGR/L-8 (632) • GHIR/L (W=260-315) (379)

299