Page 36 - Turning_catalog_INCH_2022_45_P261-508
P. 36
GROOVE-TURN GHAR/L-JHP 1.000 1.000 HBH HF WF OHN .177 .535 .276 H 4.996 (Key:HW5.0) OHN (Key: HW5.0) (Key: T-20/5) Right-hand shown
SR M6X25DIN912 12.9U
PLG 1/8ISO1179
OR 5X1N
PSI Max
Holders with High-Pressure
G 1/8"-28 typ.x2
SR M6X12DIN6912
(Key: HW5.0)
OAL
Coolant Channels for Grooving
.276
and Turning Adapters
SR 14-519
B
CDX
(2)
Designation
HBH
HF
H
B
(1)
OAL
CDX
WF
GHAR/L 25.4-8-JHP
.54
.646
1.004
.984
1.000
• For user guide and accessories see pages 471-490
(2) See specific adapter dimensions
For tools, see pages: GADR/L-JHP (296)
(1) Minimum overhang
Spare Parts
Designation
GHAR/L-JHP SR 14-519 T-20/5 OR 5X1N SR M6X12DIN6912 SR M6X25 DIN912 PLG 1/8ISO1179 HW 5.0X120 MM
OAL WB_2
GADR/L-JHP
Adapters with High-Pressure OAH HF
Coolant Channels Carrying
Groove-Turn Inserts for up CDX WB PSI Max
to .98" Deep Machining WF
CWN-CWX Right-hand shown
Designation CWN (1) CWX (2) CDX (3) WB HF OAH OAL WB_2 WF
GADR/L 8-JHP .260 .327 1.004 .236 1.260 1.654 2.480 .669 .551
GADR/L 10-JHP .339 .406 1.004 .291 1.260 1.654 2.480 .697 .551
• For user guide and accessories see pages 471-490
(1) Minimum cutting width
(2) Maximum cutting width
(3) Cutting depth maximum
For inserts, see pages: GDMA (312) • GDMF (298) • GDMM-CC (637) • GDMN (299) • GDMU (299) • GDMY (298) • GDMY (full radius) (300)
• GDMY-F (301) • GDPY (303) • GIA-K (long pocket) (310) • GIF (long pocket) (308) • GIF-E (W=315,394 full radius) (304)
• GIF-E (W=315,394) (302) • GIPA/GIDA 8 (full radius) (499)
Flow Rate vs. Pressure
1015 PSI 1450 PSI 2030 PSI
Designation Flow Rate (gallons/min) Flow Rate (gallons/min) Flow Rate (gallons/min)
GADR/L-JHP 15-17 23-25 27-19
OHX
CGHN-8-10D
Heavy Duty Deep Grooving H HF
and Turning Blades
CWN-CWX OAL WB
150˚
Designation CWN (1) CWX (2) OHX (3) WB HF H OAL
CGHN 52-8D .315 .327 1.968 .291 1.772 2.071 7.480 SR 76-1637 HW 4.0
CGHN 53-8D .315 .327 2.756 .291 1.772 2.071 10.236 SR 76-1637 HW 4.0
CGHN 52-10D .394 .433 2.756 .362 1.772 2.071 7.480 SR 76-1289 HW 5.0
CGHN 53-10D .394 .433 3.937 .362 1.772 2.071 10.236 SR 76-1289 HW 5.0
• For user guide, see pages 471-488
(1) Minimum cutting width
(2) Maximum cutting width
(3) Minimum overhang • When using a double-ended insert, grooving depth is limited by the insert
For inserts, see pages: GDMF (298) • GDMN (299) • GDMU (299) • GDMY (298) • GDMY (full radius) (300) • GDMY-F (301) • GDPY (303)
• GIA-K (long pocket) (310) • GIF (long pocket) (308) • GIF-E (W=315,394 full radius) (304) • GIF-E (W=315,394) (302)
• GIPA/GIDA 8 (full radius) (499)
For holders, see pages: SGTBK (673) • SGTBU/SGTBN (672)
296 ISCAR