Page 35 - Turning_catalog_INCH_2022_45_P261-508

GADR-8
GHAR/L-8 HF H
External Holders for Grooving HBH
and Turning Adapters OHX OAL
LH
WF(assembly) WF B
GAFG-L-8 CDX GHAR
Right-hand shown GROOVE-TURN
Designation H HF WF B OAL LH OHX (1) HBH TGA CDX (2) FG
GHAR/L 25.4-8 1.000 1.000 .646 1.000 5.000 1.770 1.000 .54 GADR/L 8 1.000 GAFG...R/L-8
GHAR/L 31.7-8 1.250 1.250 .896 1.250 6.000 1.770 1.000 .29 GADR/L 8 1.000 GAFG...R/L-8
• Adapters GADR/L-8 for turning and grooving, GAFG-R/L-8 for face-grooving
(1)
Maximum overhang
(2) See specific adapter dimensions
For tools, see pages: GADR/L-8 (295) • GAFG-R/L-8 (633) • PCADR/L 34N-RE (331)

Spare Parts
Designation
GHAR/L-8 SR 14-519 T-20/5 SR M6X25 DIN912 HW 5.0

OAL
GHAPR/L-8 HF H
External Holders for Grooving LH HBH
and Turning Perpendicularly
Oriented Adapters B
CDX
GAFG…R-8 GADL 8 GHAPR Right-hand shown

Designation H HF B OAL LH HBH TGA (1) CDX (2) FG (3)
GHAPR/L 31.7-8 1.250 1.250 1.250 6.100 1.180 .29 GADR/L 8 1.000 GAFG...R/L-8 SR 14-519 T-20/5 SR M6X25 DIN912 HW 5.0
• Adapters GADR/L-8 for turning and grooving, GAFG-R/L-8 for face-grooving
(1) Adapter for Turning & Grooving
(2) See specific adapter dimensions
(3) Adapter for Face Grooving
For tools, see pages: GADR/L-8 (295) • GAFG-R/L-8 (633) • PCADR/L 34N-RE (331)

OAL

GADR/L-8
Adapters for up to .98" OAH HF
Deep Machining WB
WF
CDX
WB_2
CWN-CWX Right-hand shown
Designation CWN (1) CWX (2) CDX (3) WB HF OAH OAL WB_2 WF
GADR/L 8 .260 .327 1.004 .236 1.260 1.654 2.480 .472 .354
• For user guide, see pages 471-488
(1) Minimum cutting width
(2) Maximum cutting width
(3) Cutting depth maximum
For inserts, see pages: GDMA (312) • GDMF (298) • GDMM-CC (637) • GDMN (299) • GDMU (299) • GDMY (298) • GDMY (full radius) (300)
• GDMY-F (301) • GIA-K (long pocket) (310) • GIF-E (W=315,394 full radius) (304) • GIF-E (W=315,394) (302) • GIPA/GIDA 8 (full radius) (499)
For holders, see pages: C#-GHAD-8 (681) • C#-GHAPR/L-8 (682) • GHAPR/L-8 (295) • GHAR/L-8 (295) • IM-GHAD-8 (690)

295