Page 44 - Turning_catalog_INCH_2022_45_P261-508
P. 44
GROOVE-TURN GIF-E Dimensions ±.001 CW 7° .602 Ref. IC830 Tough 1 Hard Recommended Machining Data
(W=.157-.236 radius)
.197
Precision Double-Ended
Full Radius Inserts for
Profiling and Grooving
BW
RE=CW/2
IC8250
f turn
f groove
IC808
ap
BW
Designation
RE
CW
(IPR)
(IPR)
(inch)
.465
GIF 4.00E-2.00
.0020
.0008
•
•
•
GIF 5.00E-2.50
.0043-.0083
.0020
.0091-.0165
.0008
.197
.098
.445
.157
.000-.098
•
•
•
GIF 6.00E-3.00 .157 .079 CWTOL (1) RETOL (2) .126 CDX (3) • • • • IC20 .000-.079 .0079-.0134 .0035-.0067
.118
.236
.000-.118
.189
.425
.0051-.0098
.0020
.0008
.0094-.0197
• DMIN for internal machining = 276" • For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
For tools, see pages: Anti-Vibration Blades (293) • C#-GHDR/L (284) • CGHN 26-M (380) • CGHN 32-DGM (382) • CGHN 32-M (381)
• CGHN-D (291) • CGHN-DG (292) • CGHN-S (291) • CGPAD (290) • CGPAD-JHP (290) • GHDR/L (short pocket) (285) • GHDR/L-JHP (short pocket) (286)
• GHGR/L (287) • GHMPR/L (283) • GHMR/L (283)
±.001
GIF-E 1.18 Ref.
(W=.315,.394 full radius) 7°
Precision Double-Ended .252
Full Radius Inserts for BW
Profiling and Grooving CW
RE
Dimensions Tough 1 Hard Recommended Machining Data
IC830 IC8250 ap f turn f groove
Designation CW RE CWTOL (1) RETOL (2) BW (inch) (IPR) (IPR)
GIF 8.00E-4.00 .315 .157 .0008 .0020 .236 • .000-.157 .0126-.0264 .0071-.0134
GIF 10.00E-5.00 .394 .197 .0008 .0020 .315 • • .000-.197 .0138-.0307 .0087-.0157
• DMIN for internal machining = 256" • For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: C#-GHDR/L (284) • CGHN-8-10D (296) • GADR/L-8 (295) • GADR/L-JHP (296) • GAFG-R/L-8 (633) • GHDR/L (long pocket) (294)
• GHDR/L-JHP (long pocket) (294) • GHFG-R/L-8 (632) • GHFGR/L-8 (632) • GHIR/L (W=260-315) (379)
GIP-E ±.001
(full radius) 7°
Precision Double-Ended .602 Ref. .197
Full Radius Inserts for
Profiling and Grooving CW
RE=CW/2 BW
Dimensions Tough 1 Hard Recommended Machining Data
IC830 IC8250 IC808 IC908 IC20 IC5010 IC428 IC807 IC804 ap f turn f groove
Designation CW RE CWTOL (1) RETOL (2) BW CDX (3) (inch) (IPR) (IPR)
GIP 3.00E-1.50 .118 .059 .0008 .0020 .094 .484 • • • • • • • .000-.059 .0071-.0110 .0031-.0059
GIP 4.00E-2.00 .157 .079 .0008 .0020 .126 .465 • • • • • • • • .000-.079 .0079-.0134 .0039-.0079
GIP 5.00E-2.50 .197 .098 .0008 .0020 .157 .445 • • • • .000-.098 .0098-.0165 .0051-.0091
GIP 6.00E-3.00 .236 .118 .0008 .0020 .189 .425 • • .000-.118 .0106-.0213 .0059-.0106
GIP 6.35E-3.18 .250 .125 .0008 .0020 .189 .418 • • .000-.122 .0114-.0224 .0063-.0114
• DMIN for internal machining = 276" • For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
For tools, see pages: C#-GHDR/L (284) • CGHN 26-M (380) • CGHN 32-DGM (382) • CGHN 32-M (381) • CGHN-D (291) • CGHN-DG (292)
• CGHN-S (291) • CGPAD (290) • CGPAD-JHP (290) • GHDR/L (short pocket) (285) • GHDR/L-JHP (short pocket) (286) • GHGR/L (287)
• GHMPR/L (283) • GHMR/L (283) • GHSR/L (398) • GHSR/L-JHP-SL (399) • NQCH-GHSR/L-JHP (399)
304 ISCAR